Desktop Enclosure for HM782 Mobile Radios

The Hytera 12492 is a purpose-built desktop cabinet that turns an HM782 Mobile Radio into a professional dispatch base station. The fitted enclosure helps protect the radio, simplifies cable management, and keeps microphones and accessories within easy reach for daily use. Designed for control rooms, offices, and fixed sites. The cabinet needs a separate switching power supply SEC1223 with overcurrent, short-circuit, and overvoltage protection. The 12492 provides a stable platform for 24/7 operation and makes installation and servicing straightforward.

H-Series

HM782

Desktop Enclosure for HM6 Mobile Radios

The Hytera 12493-H is a purpose-built desktop cabinet that turns an HM652 and HM682 Mobile Radio into a professional dispatch base station. The fitted enclosure helps protect the radio, simplifies cable management, and keeps microphones and accessories within easy reach for daily use. Designed for control rooms, offices, and fixed sites. The cabinet needs a separate switching power supply SEC1223 with overcurrent, short-circuit, and overvoltage protection. The 12493-H provides a stable platform for 24/7 operation and makes installation and servicing straightforward.

H-Series

HM652, HM682

Rugged Audio Cable with PTT Button and MIC for use with Receive-Only Earpieces

The Hytera ACM-01 is an audio accessory cable featuring a built-in Push-to-Talk (PTT) button and microphone. It enables discreet, hands-free voice communication and is designed for use with Hytera iSeries handheld two-way radios. The ACM-01 is part of a two-piece audio accessory and supports multiple earbuds and over-the ear audio earpiece accessories via the 3.5 mm audio jack, making it a cost-effective and flexible solution for different users. The ACM-01 attaches to the radio via a dual-Pin connector secured with a thumb screw, preventing accidental disconnection. A three-foot cable links the connector to the integrated PTT/MIC unit, which includes a sturdy clip for attaching to a vest or clothing, ensuring discreet and convenient use. Additionally, a short flying lead extends from the PTT/MIC and ends in a 3.5 mm audio jack socket, compatible with various Hytera earpiece accessories (outlined below). Designed for durability, this rugged accessory meets IP54 compliance, providing reliable protection against dust and splashing or spraying water. With a wide operating temperature range of -4ºF to 140ºF, it excels in demanding environments. Multiple audio earpiece accessories are supported by the ACM-01 via the 3.5 mm audio jack, making it cost-effective and flexible for different users. Supported Earpieces with the ACM-01: ES-01 Black earbud EA-01 Earpiece with transparent acoustic tube EH-01 Earbud with behind-the-ear C-style hook EH-02 Over-the-ear earpiece with swivel hook

iSeries

BD502i, BD552i, BD612i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i

Audio Cable with PTT Button and Microphone for use with a Receive Only Earpieces

The Hytera ACN-01 is an audio accessory cable that includes an integrated Push-to-Talk (PTT) button with a microphone (MIC). It provides discreet audio communications with hands-free voice activation for use with Hytera iSeries handheld two-way radios. The ACN-01 connects to the radio with a 16-Pin connector that is secured to the radio with a clip and thumb screw that eliminates unintentional disconnection and wear on the connector. A three-foot cable runs from the 16-Pin radio connector to the PTT/MIC that features a durable clip for securing it to a vest or clothing for discreet operation. It has a short flying lead from PTT/MIC that is terminated with a 3.5 mm audio jack socket for use with a variety of Hytera earpiece accessories (listed below). The ACN-01 is durable and rugged for use in demanding environments. It is IP54 compliant for protection from dust and splashing or spraying water and has a wide operating temperature of -4ºF to 140ºF. The ACN-01 supports multiple earbuds and over-the-ear audio earpiece accessories via the 3.5 mm audio jack, making it cost-effective and flexible for different users. Supported Earpieces with the ACN-01: ES-01 Black earbud EA-01 Earpiece with transparent acoustic tube EH-01 Earbud with behind-the-ear C-style hook EH-02 Over-the-ear earpiece with swivel hook

iSeries

PD702i, PD782i, PD982i, PD982i

Audio Cable with Push-to-Talk Button and Microphone for use with a Variety of Earpieces and Earbuds

The Hytera ACN-02P is an audio accessory cable that includes an integrated Push-to-Talk (PTT) button with a microphone (MIC). It provides discreet audio communications with hands-free voice activation for use with Hytera H-Series handheld two-way radios. The ACN-02P connects to the radio with a 13-Pin connector that is secured to the radio with a clip and thumb screw that eliminates unintentional disconnection and wear on the connector. A three-foot cable runs from the 13-Pin radio connector to the PTT/MIC that features a durable clip for securing it to a vest or clothing for discreet operation. It has a short flying lead from PTT/MIC that is terminated with a 3.5 mm audio jack socket for use with a variety of Hytera earpiece accessories (listed below). The ACN-02P is durable and rugged for use in demanding environments. It is IP54 compliant for protection from dust and splashing or spraying water and has a wide operating temperature of -4ºF to 140ºF. Additionally, it is intrinsically safe when used with Hytera H-Series Intrinsically Safe two-way radios. This ensures compliance with stringent safety standards by eliminating the risk of sparks or excessive energy discharge from the accessory in environments where explosive dust or gas is present. The ACN-02P supports multiple earbuds and over-the-ear audio earpiece accessories via the 3.5 mm audio jack, making it cost-effective and flexible for different users. Supported Earpieces with the ACN-02P: ES-01 Black earbud EA-01 Earpiece with transparent acoustic tube EH-01 Earbud with behind-the-ear C-style hook EH-02 Over-the-ear earpiece with swivel hook

H-Series

HP602, HP682, HP702, HP782

Durable Audio Cable with integrated PTT Button and MIC for use with Receive-Only Earpieces

The Hytera ACS-01 is a versatile audio accessory cable equipped with an integrated Push-to-Talk (PTT) button and microphone, allowing for seamless, hands-free communication. Designed for compatibility with Hytera iSeries handheld two-way radios, it ensures reliable performance in discreet operational settings. The ACS-01 is part of a two-piece audio accessory and supports multiple earbuds and over-the-ear audio earpiece accessories via the 3.5 mm audio jack, making it a cost-effective and flexible solution for different users. The ACS-01 securely connects to the radio via a 3.5 mm audio jack, with a durable three-foot cable leading to the integrated PTT/MIC unit. A rugged clip allows for easy attachment to a vest or clothing, ensuring discreet and accessible operation. Additionally, a short flying lead extends from the PTT/MIC, terminating in a 3.5 mm audio jack socket compatible with the Hytera earpiece accessories listed below. Engineered for durability, this accessory meets IP54 compliance standards, offering protection against dust and splashing water. Its broad operating temperature range of -4ºF to 140ºF ensures dependable performance in harsh environments. Multiple audio earpiece accessories are supported by the ACS-01 via the 3.5 mm audio jack, making it a flexible and cost-effective choice. Supported Earpieces with the ACS-01: ES-01 Black earbud EA-01 Earpiece with transparent acoustic tube EH-01 Earbud with behind-the-ear C-style hook EH-02 Over-the-ear earpiece with swivel hook

iSeries

BD302i, PD362i

Bluetooth Audio Adapter for Wireless Communication and Hands-Free Operation

The Hytera ADA-01 is a compact Bluetooth audio adapter designed to bring wireless functionality to compatible Hytera mobile radios. By connecting directly to the mobile radio’s 10-Pin aviation port, it creates a stable Bluetooth access point, allowing users to pair wireless audio accessories for hands-free communication and improved mobility. Featuring Bluetooth 4.0 technology, the ADA-01 delivers reliable connectivity within a typical operating range of 33 - 100 ft., making it ideal for vehicle and control room environments.

H-Series

MD782i

Bluetooth Adapter

IP54 compliant bluetooth adapter for DMR and TETRA portable radios provides convenience and hassle free communication between the radio and audio accessories

iSeries

PD702i, PD782i, PD982i, PD982i

High-Performance 3.5” Antenna for DMR Two-Way Radios

The discontinued Hytera AN0140H04 is a Very High Frequency (VHF) antenna engineered for optimal performance in open outdoor environments where long-range line-of-sight communication is critical. Designed for use in the 136–145MHz frequency range, this compact 3.5-inch antenna offers clear and reliable communications. The AN0140H04 includes GPS functionality, receiving satellite signals at 1575MHz. When used with compatible Hytera radios, it enables location tracking, geofencing, and advanced workforce safety features. Constructed for durability, the AN0140H04 can withstand everyday wear in demanding field conditions. Its durable design and SMA connector helps reduce damage from impact, while its compact form factor prevents snags or interference when worn on a belt or vest.

iSeries

PD602i, PD662i, PD682i

High-Gain 6.7” Antenna for Extended Range Communications

The Hytera AN0141H06 is a VHF antenna optimized for use in open and rural areas where long-range signal propagation is required. Operating in the 136–147MHz frequency band, this 6.7-inch antenna enhances communication distance and signal strength. Its long, stout form factor provides superior gain compared to stubby antennas. Constructed with a standard SMA connector, the antenna is built to withstand field use in professional environments.

iSeries

BD502i, BD552i, BD612i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD982i

Compact 4.7” Antenna for Portable VHF Radios

The Hytera AN0141H07 is a compact VHF antenna operating within the 136–147MHz range. Measuring just 4.7 inches, this stubby-style antenna offers excellent portability and reduced snag potential. Ideal for users who carry radios on their belt or vest, the antenna supports clear communications in short- to mid-range urban or in-building environments. The SMA-style connection ensures a secure fit for daily professional radio use.

iSeries

BD502i, BD552i, BD612i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD982i, PD982i

6.7” Antenna for High-Range and GPS-Enabled Radios

The Hytera AN0141H09 is a high-performance VHF antenna with integrated GPS reception for radios operating in the 136–147MHz and 1575MHz bands. Its 6.7-inch length enables stronger signal reception over greater distances. Designed for field professionals requiring location tracking and fleet coordination, the antenna supports advanced GPS applications such as geofencing and mapping. Rugged construction and SMA compatibility make it dependable in mission-critical deployments.

iSeries

PD982i

Durable 6.7” GPS-Integrated Antenna for VHF Radios

The Hytera AN0143H10 is a dual-function VHF antenna built for long-range radio communication and GPS functionality. Covering the 136–150MHz band and receiving satellite GPS signals at 1575MHz, this 6.7-inch antenna is ideal for professionals who rely on location-based services. Its tough construction ensures reliable performance in harsh field conditions, and the SMA-male connector delivers a secure attachment to compatible Hytera handheld radios.

iSeries

PD602i, PD662i, PD682i

Compact 3.5” Stubby Antenna for GPS-Enabled Radios

The Hytera AN0148H06 is a short VHF stubby antenna supporting 144–154MHz frequencies and built-in GPS at 1575MHz. Designed for clear voice communication and real-time positioning, the 3.5-inch antenna offers a practical solution for users requiring mobility and compact gear. The integrated helical brass core enhances signal reception while maintaining structural strength. Ideal for security, manufacturing, and logistics professionals who use GPS tracking in tight operational spaces.

iSeries

PD602i, PD662i, PD682i

Compact 3.5” Antenna for Portable Radios with Location Services

The Hytera AN0148H07 is a VHF stubby antenna with integrated GPS, covering the 144–154MHz and 1575MHz frequency bands. It is designed for Hytera handheld radios where compact size and location tracking are essential. The 3.5-inch length minimizes obstruction while maintaining strong signal performance. Its durable construction and SMA-male connector make it a reliable choice for professional use in industrial, security, and utility sectors.

H-Series

HP702, HP702, HP782, HP782

High-Gain 6.7” Antenna for Extended VHF Communication

The Hytera AN0153H07 is a stout long VHF antenna designed for professional-grade radios operating in the 147–160MHz band. Its 6.7-inch length enhances signal range and voice clarity in rural and outdoor environments. Ideal for utility, construction, and fleet teams requiring dependable communication coverage. Built with an SMA connector and rugged materials for daily field use.

iSeries

BD502i, BD552i, BD612i, HP602, HP682, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i

4.7” Compact Antenna with Location-Enabled Support

The Hytera AN0153H08 is a GPS-enabled stubby antenna for professional radios operating in the 147–160MHz band. With GPS support at 1575MHz, this 4.7-inch antenna enables geolocation services such as tracking, mapping, and emergency response. Compact and durable, it is designed for mobile teams in security, manufacturing, and logistics.

iSeries

BD502i, BD552i, BD612i, HP602, HP682, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD982i, PD982i

6.7” GPS-Enabled Antenna for Extended Voice and Location Support

Designed for reliable communication and GPS tracking, the Hytera AN0153H12 operates in the 147–160MHz and 1575MHz frequency ranges. Its 6.7-inch design provides superior signal transmission while enabling real-time geolocation. Suitable for outdoor professionals requiring both voice and data positioning in one rugged accessory.

iSeries

PD982i

Rugged 7.9” Antenna for Long-Distance Coverage and Tracking

The Hytera AN0155H08 is a robust 7.9-inch antenna tuned for the 136–174MHz VHF range and GPS at 1575MHz. Designed for users operating in large geographic areas, this antenna delivers both extended voice range and precise GPS functionality. Its sturdy build and SMA connector support reliable use in transport, utility, and emergency services.

H-Series, iSeries

BD502i, BD552i, BD612i, HP602, HP682, PD402i, PD482i, PD502i, PD562i, PD982i, PD982i

7.9” High-Gain Antenna for Extended Range and GPS Support

The Hytera AN0155H13 is a long-range antenna featuring GPS integration for radios operating in the 136–174MHz frequency range. With satellite signal support at 1575MHz, it enables real-time positioning in addition to high-quality voice communications. The 7.9-inch design provides enhanced coverage, while its SMA-male connector ensures durable and reliable use in rugged environments.

H-Series

HP702, HP702, HP782, HP782

6.7” GPS-Capable Antenna for Hytera Two-Way Radios

The Hytera AN0155H15 is a VHF antenna built for radios requiring operation in the 146–164MHz range. Featuring GPS reception at 1575MHz, this 6.7-inch antenna supports geolocation and tracking functions essential for coordination and safety in large-scale operations. Designed with a sturdy SMA-male connection, it provides the durability needed for daily field use.

H-Series

HP702, HP702, HP782, HP782

6.7” Rugged Antenna for Enhanced Communication and GPS Services

The Hytera AN0156H01 is a VHF long antenna with integrated GPS, supporting 147–165MHz voice communication and GPS reception at 1575MHz. The 6.7-inch form factor allows for extended signal performance, while the SMA-male connector ensures a secure fit. Ideal for field workers in utility, construction, and manufacturing sectors needing voice and GPS in a single unit.

iSeries

PD602i, PD662i, PD682i

6.7” Rugged Antenna for Enhanced Communication and GPS Services

The Hytera AN0157H01 is a VHF stubby antenna with integrated GPS, supporting 150–165MHz voice communication and GPS reception at 1575MHz. The 6.7-inch form factor allows for extended signal performance, while the SMA-male connector ensures a secure fit. Ideal for field workers in utility, construction, and manufacturing sectors needing voice and GPS in a single unit.

H-Series

HP602, HP682

3.5” GPS-Enabled Antenna for Compact Radio Use

Designed for professionals on the move, the Hytera AN0158H05 is a GPS-capable stubby antenna that operates in the 153–164MHz VHF band. Its compact 3.5-inch design is ideal for users wearing radios on the belt or vest, while GPS functionality supports tracking, geofencing, and safety applications. Durable construction and SMA-male connector ensure consistent performance in demanding conditions.

iSeries

PD602i, PD662i, PD682i

Compact 3.5” Antenna for Voice and GPS-Enabled Radios

The Hytera AN0158H06 is a rugged stubby antenna that supports both radio communication (153–164MHz) and GPS reception (1575MHz). Measuring only 3.5 inches is perfect for users in fast-paced environments where low-profile equipment is essential. It pairs with Hytera handhelds to deliver reliable communication and advanced GPS-based safety and tracking features.

H-Series

HP702, HP702, HP782, HP782

6.7” GPS-Capable Antenna for Extended Communication Range

The Hytera AN0160H13 is a high-performance long antenna built for VHF operation in the 160–174MHz range and GPS reception at 1575MHz. This 6.7-inch antenna is designed for users who need both reliable long-distance voice communication and GPS-based location services. Its robust build and SMA-male connector make it ideal for demanding environments in manufacturing, transportation, and utility sectors.

HYT, iSeries

BD502i, BD552i, BD612i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, TC-508

Compact 4.7” Antenna for Efficient VHF Communication

The Hytera AN0160H16 is a compact VHF stubby antenna engineered for efficient communication across the 145–175MHz band. Measuring 4.7 inches in length, it is optimized for users who require short-range coverage in urban or in-building environments. The stubby design minimizes interference from clothing and gear, making it ideal for belt-mounted or vest-worn radios. Built with an SMA connector, the AN0160H16 delivers durable, dependable performance in professional applications.

H-Series

HP602, HP682

6.7” GPS-Enabled Antenna for Long-Range Radio Performance

The Hytera AN0165H01 is a VHF antenna with integrated GPS, delivering both long-range radio communication and location tracking. Operating in the 156–174MHz band with GPS reception at 1575MHz, this 6.7-inch stout long antenna is ideal for field operations requiring range and positioning. The rugged SMA-male connector ensures a secure fit for Hytera handheld radios operating in mission-critical environments.

iSeries

PD602i, PD662i, PD682i

6.7” Stout Antenna for Long-Distance Communication

The Hytera AN0167H06 is a stout long VHF antenna built for clear and consistent communication in the 160–174MHz range. At 6.7 inches, it boosts coverage for users operating in rural or mobile environments. Its sturdy SMA connector and robust form factor make it an ideal antenna for demanding applications in manufacturing, construction, and transportation.

H-Series, iSeries

BD502i, BD552i, BD612i, HP602, HP682, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD982i

4.7” GPS-Capable Stubby Antenna for Hytera Radios

The Hytera AN0167H07 is a GPS-enabled VHF stubby antenna that operates in the 160–174MHz frequency band with GPS at 1575MHz. Its 4.7-inch profile is ideal for close-quarters operations, offering both reliable communication and integrated tracking. The SMA connector supports a secure fit with Hytera portable radios in manufacturing, security, and utility applications.

H-Series, iSeries

BD502i, BD552i, BD612i, HP602, HP682, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD982i, PD982i

6.7” GPS-Enabled Antenna for Long-Range Two-Way Radios

The Hytera AN0167H09 is a rugged VHF long antenna designed for extended communication in the 160–174MHz band, with GPS tracking via 1575MHz support. The 6.7-inch length enables improved range while maintaining location accuracy for applications such as fleet monitoring and search and rescue. The SMA connector ensures compatibility and secure attachment to Hytera handheld radios.

iSeries

PD982i

Compact 3.5” GPS-Enabled Antenna for VHF Radios

The Hytera AN0168H04 is a compact VHF stubby antenna designed for radios operating in the 163–174MHz frequency band. Measuring just 3.5 inches, it delivers reliable voice communications while minimizing interference when worn on a belt or vest. This antenna also supports GPS reception at 1575MHz, enabling location tracking, geofencing, and workforce safety features when paired with compatible Hytera radios. Its SMA-male connector and durable construction make it well suited for demanding field environments where mobility and situational awareness are essential.

iSeries

PD602i, PD662i, PD682i

3.5” Compact Antenna with GPS Support for Hytera Radios

The Hytera AN0168H05 is a 3.5-inch stubby antenna designed for users who need both UHF voice communication and GPS tracking. Operating in the 400–470MHz and 1575MHz bands, it provides dependable short-range communication with real-time location awareness. Ideal for industrial, security, and fleet users who require compact, efficient equipment without sacrificing functionality.

H-Series

HP702, HP702, HP782, HP782

Compact 3.5” Antenna for UHF Radios with GPS

The Hytera AN0375H14 is a UHF stubby antenna designed for radios operating in the 350–400MHz band. Its compact 3.5-inch profile supports dependable short-range communications in dense or urban environments. Integrated GPS reception at 1575MHz enables advanced location-based services such as tracking and geofencing when used with compatible Hytera radios. Built with an SMA connector and durable materials, the AN0375H14 is well suited for professionals who need both mobility and situational awareness.

iSeries

PD982i

Compact 3.5” Antenna for Reliable UHF Communication

The Hytera AN0375H18 is a compact UHF stubby antenna designed for radios operating in the 350–400MHz frequency range. Its 3.5-inch form factor makes it ideal for users who require a low-profile antenna for indoor or urban communications. Built for durability and consistent performance, the AN0375H18 provides clear voice transmission while reducing snagging and interference during daily use. The SMA connector ensures secure attachment to compatible Hytera handheld radios.

iSeries

PD502i, PD562i

6.6” Flexible Whip Antenna with Enhanced Radiation Characteristics

The Hytera AN0375W06 is a long UHF whip antenna designed for communication in the 350–400MHz frequency range. At 6.6 inches in length, it features a flexible one-piece finish with a steel core and spiral-wound conductor to ensure optimal signal propagation. This design enhances radiation efficiency and extends communication range. The SMA connector provides secure and reliable attachment to Hytera portable radios used in commercial, security, and manufacturing environments.

iSeries

PD502i, PD562i

3.1” Compact Antenna for Tight-Space Radio Deployments

The Hytera AN0410H10 is a UHF stubby antenna optimized for use in the 400–420MHz band. With a short 3.1-inch profile, this antenna is ideal for operations that demand minimal interference from antenna length, such as indoor environments or belt-mounted radio usage. Its R-style connector ensures simple, secure installation on compatible Hytera devices.

HYT

TC-320

Low-Profile 3.1” Antenna for Discreet Communication

The Hytera AN0435H10 is a UHF stubby antenna operating in the 420–450MHz band. Its 3.1-inch height allows users to carry handheld radios more discreetly and comfortably, particularly in confined or indoor workspaces. This R-connector antenna offers consistent performance and is well-suited to use cases requiring compact accessories without sacrificing signal quality.

HYT

TC-320

Compact 3.5” SMA Antenna for Broad Frequency Coverage

UHF Stubby Antenna, SMA connector, 400-470MHz, 9cm, with Hytera logo

iSeries

BD502i, BD552i, BD612i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i

General-Purpose 3.5” Antenna with R Connector

The Hytera AN0435H19 is a UHF stubby antenna operating between 400–470MHz, featuring an R-style connector and a compact 3.5-inch build. Designed for lightweight portability and ease of use, it supports dependable voice transmission in typical business, security, or logistics deployments. Its rugged construction ensures performance in frequent-use conditions.

iSeries

BD302i

3.5” SMA Antenna with Integrated GPS for Compact Two-Way Radios

The Hytera AN0435H21 is a GPS-enabled UHF stubby antenna tailored for communication in the 400–470MHz band. Its compact 3.5-inch profile, coupled with an integrated GPS receiver operating at 1575MHz, enables precise location tracking while ensuring dependable voice communication. Built with an SMA connector, this antenna is compatible with a wide range of Hytera radios and is especially suited for tactical, security, and enterprise field operations requiring both performance and discretion.

iSeries

PD982i, PD982i

3.5” SMA-Male Antenna with Integrated GPS for Compact Radios

The Hytera AN0435H23 is a UHF antenna supporting GPS-enabled operation in the 400–470MHz and 1575MHz frequency ranges. With a 3.5-inch length and SMA-Male connector, it delivers compact durability and flexibility. This antenna is purpose-built for professionals requiring integrated location tracking and reliable voice connectivity, such as manufacturing, utility workers, and industrial users.

iSeries

PD602i, PD662i, PD682i

Compact SMA-Male GPS Antenna for Hytera Two-Way Radios

The Hytera AN0435H25 antenna offers robust UHF voice communication and GPS location tracking in a compact 3.5-inch format. Designed to operate on 400–470MHz (UHF) and 1575MHz (GPS), this antenna uses an SMA-Male connector and supports advanced tracking capabilities. Its design and compatibility make it ideal for fleet operations, emergency services, and teams requiring high precision in the field.

H-Series

HP702, HP702, HP782, HP782

6.2” Flexible Antenna with SMA Connector for Extended Range

The Hytera AN0435W09 is a long-form whip antenna designed to enhance signal range in the 400–470MHz UHF band. At 6.2 inches, its spiral-wound steel core ensures excellent signal propagation, while the flexible one-piece construction provides long-term durability in rugged environments. The SMA connector delivers a secure fit with Hytera radios, making this antenna suitable for extended outdoor coverage.

iSeries

BD502i, BD552i, BD612i, HP602, HP682, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i

6.2” Compact Antenna with SMA Connector for Two-Way Radios

The Hytera AN0445H03 is a UHF stubby antenna designed to operate within the 420–470MHz frequency range. With a length of 6.2 inches and an SMA connector, it supports enhanced signal performance for users requiring a balance of portability and communication clarity. Ideal for demanding environments, this antenna is built to deliver consistent performance while minimizing interference or damage from daily wear. Its compact and sturdy design makes it well-suited for manufacturing, utilities, and industrial teams.

HYT

TC-508

Flexible 6.2” SMA Antenna for Extended Range UHF Radios

The Hytera AN0445W05 is a long whip antenna engineered for extended-range communications in the 410–480MHz band. This 6.2-inch SMA antenna provides enhanced reception and transmission, thanks to its flexible structure and steel core construction. Designed to withstand outdoor exposure and frequent use, it offers reliable performance across a range of commercial and industrial applications. Its extended length is optimal for boosting signal reach in areas with obstructions or interference.

H-Series

HP602, HP682

3.5” Rugged Antenna with SMA Connector for Two-Way Radios

The Hytera AN0455H012 is a 3.5-inch stubby antenna designed for the UHF 440–470MHz frequency band. Featuring a space-efficient design with an SMA connector, it is built for applications where radio size and portability are critical. Its rugged construction resists wear and tear, making it ideal for high-intensity industries such as manufacturing, warehousing, and construction where unobtrusive, yet high-performing antennas are essential.

HYT

TC-508

3.1” Low-Profile Antenna with R Connector for Hytera Radios

The Hytera AN0460H11 is a short UHF stubby antenna tailored for use in the 450–470MHz band. Measuring just 3.1 inches in length, it offers minimal profile with a durable R connector, suitable for applications where equipment is frequently handled or worn. Its compact form ensures minimal interference while delivering consistent performance, making it ideal for personnel who require discretion and mobility without compromising signal strength.

HYT

TC-320

6.2” Flexible SMA Antenna for Long-Range UHF Radio Performance

The Hytera AN0460W19 is a long and flexible whip antenna engineered for performance in the 440–470MHz UHF band. With a steel core and spiral-wound conductor, this 6.2-inch antenna ensures exceptional radiation characteristics and optimal signal range. The one-piece SMA construction enhances resilience, making it suitable for rigorous operational environments such as emergency response, transportation, and industrial logistics.

HYT, iSeries

BD502i, BD552i, BD612i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, TC-508

3.5” Compact SMA Antenna for Two-Way Radio Applications

The Hytera AN0485H05 is a compact UHF stubby antenna designed for reliable communications in the 450–520MHz frequency band. At just 3.5 inches long and equipped with a standard SMA connector, this antenna delivers consistent radio performance while minimizing the profile and risk of snagging on uniforms or gear. Ideal for users operating in fast-paced or confined environments, the AN0485H05 supports clear transmission and reception for daily field use.

H-Series

HP602, HP682

3.5” SMA-M Stubby Antenna for Hytera Radios with GPS Capability

The Hytera AN0485H13 is a stubby UHF antenna with built-in GPS, offering dual performance in the 450–520MHz and 1575MHz bands. This 3.5-inch antenna features an SMA male connector and is engineered for use with Hytera radios that support location tracking, geofencing, and personnel monitoring. Its rugged build and compact size enhance usability for mobile teams in logistics, security, and emergency response who require both communications and GPS functionality.

iSeries

PD602i, PD662i, PD682i

3.5” GPS-Enabled UHF Antenna for Hytera Professional Radios

The Hytera AN0485H19 antenna delivers dual-frequency performance for UHF and GPS operations in a compact 3.5-inch form. Built with an SMA male connector and designed for the 450–527MHz and 1575MHz bands, it offers precise GPS capability and reliable voice/data communication. The antenna’s rugged construction supports mission-critical operations, ensuring communication stability and tracking accuracy in demanding environments.

H-Series

HP702, HP702, HP782, HP782

6.3” Flexible SMA Antenna for Long-Range UHF Radios

The Hytera AN0495W04 is a whip-style antenna designed for long-range UHF communication in the 470–520MHz band. Measuring 6.3 inches in length and featuring a durable SMA connector, this antenna enhances transmission distance and reception clarity. Its flexible build and spiral-wound core provide excellent radiation characteristics, making it suitable for mobile professionals who demand high-performance connectivity in the field.

H-Series, iSeries

HP602, HP682, PD402i, PD482i

3.5” GPS-Enabled SMA Antenna for Mission-Critical Communications

The Hytera AN0873H07 is a GPS-integrated UHF antenna engineered to support critical communications in the 806–941MHz frequency band. With a 3.5-inch stubby profile and SMA connector, this antenna is ideal for users requiring compact form factors without sacrificing signal performance. It includes a GPS antenna operating at 1575MHz to enable accurate positioning, geofencing, and safety monitoring when used with compatible Hytera radios such as the PD702i, PD752i, PD782i, and PD982i. Durably built for high-demand field environments, the AN0873H07 provides a reliable solution for teams in manufacturing, utilities, and industrial operations where both communication and location tracking are essential.

iSeries

PD702i, PD782i, PD982i

Dual-Band LTE Antenna for MNC360 PoC Mobile Radios

The Hytera AN1700W01 is an external LTE paddle antenna designed for the Hytera MNC360 PoC mobile radio. Covering a broad frequency range from 700–960MHz and 1710–2700MHz, this antenna provides robust signal performance across multiple LTE bands for reliable connectivity in wide-area mobile communication environments. With a slim profile measuring 6.2 x 0.6 in, the AN1700W01 is engineered for low-profile installations in fleet vehicles and mobile setups. Its SMA connector ensures secure attachment and compatibility with Hytera’s mobile platforms. The AN1700W01 is included with the MNC360 and is also available as a standalone replacement.

PoC

MNC360

Belt Clip for Carrying iSeries Two-Way Radios

The Hytera BC08 is a durable belt clip for Hytera handheld radios that provides a comfortable and convenient carrying option for all-day use. The belt clip easily and securely connects to the back of the radio to keep the radio firmly in place on a belt or vest. Hytera belt clips also can be used with a variety of audio headsets and earpieces for comfortable operation and convenient communication.

HYT, iSeries, PoC

BD502i, BD552i, BD612i, PD402i, PD482i, PD502i, PD562i, TC-508, VM780

Belt Clip for Carrying BD302i DMR and TC--320 Analog Two-Way Radios

The Hytera BC16 is a durable belt clip for Hytera handheld radios that provides a comfortable and convenient carrying option for all-day use. The belt clip easily and securely connects to the back of the radio to keep the radio firmly in place on a belt or vest. Hytera belt clips also can be used with a variety of audio headsets and earpieces for comfortable operation and convenient communication.

HYT, iSeries

BD302i, TC-320

Spring-Action Belt Clip for Carrying PD iSeries Two-Way Radios

The Hytera BC19 is a durable, spring-action belt clip for Hytera handheld radios that provides a comfortable and convenient carrying option for all-day use. The belt clip easily and securely connects to the back of the radio to keep the radio firmly in place on a belt or vest. Hytera belt clips also can be used with a variety of audio headsets and earpieces for comfortable operation and convenient communication.

iSeries

PD402i, PD482i, PD702i, PD782i, PD982i, PD982i

Belt Clip for Carrying PD6 Series Two-Way Radios

The Hytera BC22 is a durable belt clip for Hytera handheld radios that provides a comfortable and convenient carrying option for all-day use. The belt clip easily and securely connects to the back of the radio to keep the radio firmly in place on a belt or vest. Hytera belt clips also can be used with a variety of audio headsets and earpieces for comfortable operation and convenient communication.

iSeries

PD662i, PD682i

Belt Clip for Carrying PD6 iSeries Two-Way Radios

The Hytera BC24 is a durable belt clip for Hytera handheld radios that provides a comfortable and convenient carrying option for all-day use. The belt clip easily and securely connects to the back of the radio to keep the radio firmly in place on a belt or vest. Hytera belt clips also can be used with a variety of audio headsets and earpieces for comfortable operation and convenient communication.

iSeries

PD602i

Belt Clip for Carrying PD362i Two-Way Radios

The Hytera BC29 is a durable belt clip for Hytera handheld radios that provides a comfortable and convenient carrying option for all-day use. The belt clip easily and securely connects to the back of the radio to keep the radio firmly in place on a belt or vest. Hytera belt clips also can be used with a variety of audio headsets and earpieces for comfortable operation and convenient communication.

iSeries

PD362i

Secure Carry Clip for Hytera Portable Radios Belt Clip for Carrying PD Series Two-Way Radios

The Hytera BC33 is a durable belt clip for Hytera handheld radios that provides a comfortable and convenient carrying option for all-day use. The belt clip easily and securely connects to the back of the radio to keep the radio firmly in place on a belt or vest. Hytera belt clips also can be used with a variety of audio headsets and earpieces for comfortable operation and convenient communication.

iSeries

PD502i, PD562i, PD602i, PD662i, PD682i

RVM Clip 

RVM Clip

PoC

VM682

Belt Clip for Carrying PD662i UL913 and PD682i Two-Way Radios

The Hytera BC36 is a durable belt clip for Hytera handheld radios that provides a comfortable and convenient carrying option for all-day use. The belt clip easily and securely connects to the back of the radio to keep the radio firmly in place on a belt or vest. Hytera belt clips also can be used with a variety of audio headsets and earpieces for comfortable operation and convenient communication.

iSeries

PD602i, PD662i, PD682i

Belt Clip for Carrying H-Series Handheld Two-Way Radios

Belt Clip

H-Series

HP702, HP702, HP782, HP782

Belt Clip

Belt Clip

PoC

VM780

Belt Clip for Carrying HP602 and HP682 H-Series DMR Two-Way Radios

The Hytera BC48 is a durable belt clip for Hytera handheld radios that provides a comfortable and convenient carrying option for all-day use. The belt clip easily and securely connects to the back of the radio to keep the radio firmly in place on a belt or vest. Hytera belt clips also can be used with a variety of audio headsets and earpieces for comfortable operation and convenient communication.

H-Series

HP602, HP682

Belt Clip for Carrying PNC380S Two-Way PoC Radios

The Hytera BC50 is a durable belt clip for Hytera handheld radios that provides a comfortable and convenient carrying option for all-day use. The belt clip easily and securely connects to the back of the radio to keep the radio firmly in place on a belt or vest. Hytera belt clips also can be used with a variety of audio headsets and earpieces for comfortable operation and convenient communication.

PoC

PNC380S

Belt Clip for Carrying PNC360S PoC Radios

Belt Clip

PoC

PNC360S

Belt Clip for Carrying PNC360S Two-Way Radios

The Hytera BC66 is a compact, durable belt clip designed for convenient and secure attachment of the Hytera PNC360S to belts, waistbands, or work vests. Engineered from high-quality polycarbonate, the BC66 allows users to keep their radio within reach while freeing up their hands for other tasks. Its sturdy construction ensures reliable performance, while the low-profile design offers comfort during long shifts. Ideal for security, education, hospitality, and facilities management, the Hytera BC66 Belt Clip enhances mobility and accessibility for on-the-go radio users.

PoC

PNC360S

High-Performance Lithium-Polymer Battery

The Hytera BP1503 Lithium-polymer Battery is engineered for reliable and long-lasting operation. This lightweight and efficient battery delivers all-day performance on a single charge with a 5/5/90 duty cycle. The BP1503 pairs with the PD402i, PD482i, and PD502i DMR two-way radios. It also supports the following End of Life (discontinued) radios: PD412i, PD562i, PD602i, PD662i, and PD682i. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BP1503 is a 1500 mAh Lithium-polymer smart battery with a 7.4 V nominal voltage that weighs 3.1 oz and is rated for over 500 charge cycles. It has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

iSeries

PD402i, PD482i, PD502i, PD562i, PD602i, PD662i, PD682i

High-Performance IP54-Rated Lithium-Ion Two-Way Radio Battery

The Hytera BL1506 Lithium-Ion Battery is engineered for reliable and long-lasting operation. With a 1500 mAh capacity, this battery delivers 16 hours of performance on a single charge with a 5/5/90 duty cycle. The BL1506 pairs with the BD502i, BD552i, and BD612i DMR Two-Way Radios. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL1506 is a 1500 mAh Lithium-ion smart battery with a 7.2 V nominal voltage that weighs just 2.6 oz and is rated for over 500 charge cycles. It is IP54 compliant and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

iSeries

BD502i, BD552i, BD612i

High-Performance Lithium-Ion Analog Two-Way Radio Battery

The Hytera BL1715 Lithium-Ion battery is engineered for reliable and long-lasting operation. This battery delivers 10 hours of performance on a single charge with a 5/5/90 duty cycle. When paired with the TC-320 Analog Radio, this battery supports advanced features like a battery strength indicator, high/low power switching, auto battery save, and a low battery alert. The BL1715 is a 1700 mAh Lithium-ion battery with a 3.7 V nominal voltage that weighs just 1.3 oz and is rated for over 400 charge cycles. It has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

HYT

TC-320

High-Performance IP54-Rated Lithium-Ion Two-Way Radio Battery

The Hytera BL1719 Lithium-Ion battery is engineered for reliable and long-lasting operation. This battery delivers 12 hours of performance on a single charge with a 5/5/90 duty cycle. When paired with the TC-508 or the discontinued TC-580 Analog Radios, this battery supports advanced features like a battery strength indicator, high/low power switching, auto battery save, and a low battery alert. The BL1719 is a 1650 mAh Lithium-ion battery with a 7.4 V nominal voltage that weighs just 3.6 oz and is rated for over 400 charge cycles. It has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

HYT

TC-508

High-Performance IP67-Rated Lithium-Ion Two-Way Radio Battery

The Hytera BL2008 Lithium-Ion battery is engineered for reliable and long-lasting operation. This battery delivers 15 hours of performance on a single charge with a 5/5/90 duty cycle. The BL2008 pairs with the discontinued (EOL) PD7 iSeries two-way radios. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL2008 is a 2000 mAh Lithium-ion smart battery with a 7.4 V nominal voltage that weighs just 4 oz and is rated for over 500 charge cycles. It is IP67 compliant and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

iSeries

PD702i, PD752i, PD782i

High-Performance Lithium-Ion Two-Way Radio Battery

The Hytera BL2009 Lithium-Ion Battery is engineered for reliable and long-lasting operation. This battery delivers 15 hours of performance on a single charge with a 5/5/90 duty cycle. The BL2009 is for use with the PD362i Compact DMR Radio. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL2009 is a 2000 mAh Lithium-ion smart battery with a 3.7 V nominal voltage that weighs just 1.3 oz and is rated for over 500 charge cycles. It has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

iSeries

PD362i

High-Performance IP67-Rated Lithium-Ion Two-Way Radio Battery

The Hytera BL2010 Lithium-Ion Battery is engineered for reliable and long-lasting operation. This battery delivers up to 22 hours of performance on a single charge with a 5/5/90 duty cycle. The BL2010 pairs with the PD402i and PD482i DMR Two-Way Radios. It also supports the following EOL (discontinued) radios: PD412i, PD502i, PD562i, PD602i, PD662i, and PD682i. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL2010 is a 2000 mAh Lithium-ion smart battery with a 7.4 V nominal voltage that weighs just 3.6 oz and is rated for over 500 charge cycles. It is IP67 compliant and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

iSeries

PD402i, PD482i, PD502i, PD562i

High-Performance IP68-Rated Lithium-Ion Two-Way Radio Battery

The Hytera BL2016 Lithium-Ion Battery is engineered for reliable and long-lasting operation. This battery delivers up to 20 hours of performance on a single charge with a 5/5/90 duty cycle. The BL2016 pairs with the PD982i DMR Two-Way Radio. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL2016 is a 2000 mAh Lithium-ion smart battery with a 7.4 V nominal voltage that weighs just 4 oz and is rated for over 500 charge cycles. It is IP68 compliant and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICE BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

iSeries

PD982i

High-Performance IP66-Rated Lithium-Ion Battery for Two-Way Radios

The Hytera BL2018 Lithium-Ion Battery is engineered for reliable and long-lasting operation. This battery delivers up to 20 hours of performance on a single charge with a 5/5/90 duty cycle. The BL2018 pairs with the BD502i, BD552i, and BD612i DMR Two-Way Radios. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL2018 is a 2000 mAh Lithium-ion smart battery with a 7.2 V nominal voltage that weighs just 3.8 oz and is rated for over 500 charge cycles. It is IP66 compliant and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

iSeries

BD502i, BD552i, BD612i

Intrinsically Safe High-Performance Lithium-Ion Two-Way Radio Battery

The Hytera BL2020-Ex Lithium-Ion Battery is engineered for reliable and long-lasting operation. This battery delivers up to 20 hours of performance on a single charge with a 5/5/90 duty cycle. The BL2020-Ex pairs with the following End of Life (discontinued) radios: PD502i-UL913, PD562i-UL913, PD602i-UL913, PD662i-UL913, and the PD682i-UL913. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL2020-Ex is a 2000 mAh Lithium-Ion smart battery with a 7.4 V nominal voltage that weighs just 4.2 oz and is rated for over 500 charge cycles. It is IP67 and UL913 compliant and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

iSeries

PD502i, PD562i, PD602i, PD662i, PD682i

Intrinsically Safe High-Capacity Lithium-Ion Two-Way Radio Battery

The Hytera BL2411-Ex Lithium-Ion Battery is engineered for reliable and long-lasting operation. This battery delivers up to 21 hours of performance on a single charge with a 5/5/90 duty cycle. The BL2411-Ex pairs with the following End of Life (discontinued) radios: PD702i, PD752i, and PD782i. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL2411-Ex is a 2400 mAh Lithium-ion smart battery with a 7.4 V nominal voltage that weighs just 5.4 oz and is rated for over 500 charge cycles. It is IP67 and UL913 compliant and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

iSeries

PD702i, PD782i

High-Capacity Lithium-Ion Two-Way Radio Smart Battery

The Hytera BL2415-Ex Lithium-Ion Battery is engineered for reliable and long-lasting operation. This battery delivers up to 21 hours of performance on a single charge with a 5/5/90 duty cycle. The BL2415-Ex pairs with the End of Life (discontinued) PD982 Two-Way Radio. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL2415-Ex is a 2400 mAh Lithium-ion smart battery with a 7.4 V nominal voltage that weighs just 5.1 oz and is rated for over 500 charge cycles. It is IP68 and UL913 compliant and has an operating temperature range of 32ºF to 113ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty. INTRINSICALLY SAFE BATTERIES: For use in hazardous environments where explosive dust and gas are present, use only Hytera Intrinsically Safe (IS) certified batteries with Hytera DMR IS Radios. Using any other battery in these conditions is extremely dangerous and could lead to serious harm or injury.

iSeries

PD982i

Lithium-Ion Battery (2500mAh)

Lithium-ion battery (2500mAh)

iSeries

PD982i

Li-ion Battery (2500mAh)

Li-ion Battery (2500mAh)

iSeries

PD702i, PD752i, PD782i

High-Capacity Lithium-Ion Smart Batter for HP702-IS and HP782-IS Intrinsically Safe Two-Way Radios

The Hytera BL2801-Ex Lithium-Ion Battery is engineered for reliable and long-lasting operation. This battery delivers up to 29 hours of performance on a single charge with a 5/5/90 duty cycle. The BL2801-Ex is Intrinsically Safe and pairs with the HP702-IS and HP782-IS Intrinsically Safe Radios. Intrinsic safety (IS) ensures safe operation of electronic equipment in locations where explosive gases and dust may be present. Intrinsically safe radios are designed so the electrical energy in the radio is low enough that ignition of the explosive gases will not occur. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL2801-Ex is a 2850 mAh Lithium-ion smart battery with a 7.2 V nominal voltage that weighs 6.5 oz and is rated for over 500 charge cycles. It is Intrinsically Safe compliant and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty. INTRINSICALLY SAFE BATTERIES: For use in hazardous environments where explosive dust and gas are present, use only Hytera Intrinsically Safe (IS) certified batteries with Hytera DMR IS Radios. Using any other battery in these conditions is extremely dangerous and could lead to serious harm or injury.

iSeries

HP702, HP782

High-Capacity IP67-Rated Lithium-Ion Battery

The Hytera BL3001 Lithium-Ion Battery is engineered for reliable and long-lasting operation. This battery delivers up to 17 hours of performance on a single charge with a 5/5/90 duty cycle. The BL3001 pairs with the following End of Life (discontinued) radios: PD702i, PD752i, and the PD782i. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BL3001 is a 3000 mAh Lithium-ion smart battery with a 7.4 V nominal voltage that weighs 5.3 oz and is rated for over 500 charge cycles. It is IP67-rated and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty. INTRINSICALLY SAFE BATTERIES: For use in hazardous environments where explosive dust and gas are present, use only Hytera Intrinsically Safe (IS) certified batteries with Hytera DMR IS Radios. Using any other battery in these conditions is extremely dangerous and could lead to serious harm or injury.

iSeries

PD702i, PD752i, PD782i

Lithium-Ion Intelligent Battery (3000mAh)

Lithium-Ion intelligent battery (3000mAh)

iSeries

PD982i

Li-ion Battery (3100mAh)

Li-ion Battery with 18 hour operating time (3100mAh)

iSeries

VM780

High-Performance IP54-Rated Lithium-Ion Battery Pack

The Hytera BL9915 is a high-capacity 12.5 Ah Lithium-Ion battery pack engineered to power the HR652 Compact DMR Repeater in both portable deployments and for battery power backup in fixed installations. Ideal for field operations or indoor installations, the BL9915 delivers up to 9 hours of reliable power in portable use and up to 4 hours of backup runtime at 25 W transmission power. Designed for durability and cost-efficiency, this rugged battery is rated for 500 charge cycles and recharges in just 3.5 hours using the PS8002 AC/DC Power Adapter (sold separately). IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

H-Series

HR652

High-Performance IP67-Rated Lithium-Polymer Battery for HP602 and HP682 Two-Way Radios

The Hytera BP2002 Lithium-Polymer Battery is engineered for reliable and long-lasting operation. With a 1500 mAh capacity, this lightweight and efficient battery delivers up to 20 hours of performance on a single charge with a 5/5/90 duty cycle. The BP2002 pairs with the HP602 and HP682 DMR Two-Way Radios. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BP2002 is a 2000 mAh Lithium-Polymer smart battery with a 7.7 V nominal voltage that weighs 3.4 oz and is rated for over 500 charge cycles. It is IP67-rated and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty. INTRINSICALLY SAFE BATTERIES: For use in hazardous environments where explosive dust and gas are present, use only Hytera Intrinsically Safe (IS) certified batteries with Hytera DMR IS Radios. Using any other battery in these conditions is extremely dangerous and could lead to serious harm or injury.

iSeries

HP602, HP682

High-Capacity IP68-Rated Lithium-Polymer Battery for HP702 and HP782 Two-Way Radios

The Hytera BP2403 Lithium-Polymer Battery is engineered for reliable and long-lasting operation. This battery delivers up to 24 hours of performance on a single charge with a 5/5/90 duty cycle. The BP2403 pairs with the HP702 and HP782 DMR Two-Way Radios. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BP2403 is a 2400 mAh Lithium-Polymer smart battery with a 7.7 V nominal voltage that weighs 3.9 oz and is rated for over 500 charge cycles. It is IP68-rated and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty. INTRINSICALLY SAFE BATTERIES: For use in hazardous environments where explosive dust and gas are present, use only Hytera Intrinsically Safe (IS) certified batteries with Hytera DMR IS Radios. Using any other battery in these conditions is extremely dangerous and could lead to serious harm or injury.

iSeries

HP702, HP782

High-Capacity IP68-Rated Lithium-Polymer Battery

The Hytera BP3002 Lithium-Polymer Battery is engineered for reliable and long-lasting operation. This battery delivers up to 20 hours of performance on a single charge with a 5/5/90 duty cycle. The BP3002 pairs with the HP602 and HP682 DMR Two-Way Radios. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BP3002 is a 3000 mAh Lithium-Polymer smart battery with a 7.7 V nominal voltage that weighs 4.7 oz and is rated for over 500 charge cycles. It is IP68-rated and has an operating temperature range of -22ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

H-Series

HP602, HP682

High-Capacity IP68-Rated Lithium-Polymer Battery

The Hytera BP3003 Lithium-Polymer Battery is engineered for reliable and long-lasting operation. This battery delivers up to 20 hours of performance on a single charge with a 5/5/90 duty cycle. The BP3003 pairs with Hytera HP7 DMR Two-Way Radios. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BP3003 is a 3000 mAh Lithium-Polymer smart battery with a 7.7 V nominal voltage that weighs 4.7 oz and is rated for over 500 charge cycles. It is IP68-rated and has an operating temperature range of -22ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

H-Series

HP702, HP782

Lithium-Polymer Battery (3500mAh)

Lithium-Polymer Battery with 8 hour operating time (3500mAh)

PoC

VM780

High-Capacity IP68-Rated Lithium-Polymer Battery for PNC550 PoC Device

The Hytera BP4003 Lithium-Polymer Battery is engineered for reliable and long-lasting operation. This battery delivers up to 24 hours of performance on a single charge with a 5/5/90 duty cycle. The BP4003 pairs with the End of Life (discontinued) PNC550 Smart PoC Radio. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BP4003 is a 4000 mAh Lithium-Polymer smart battery with a 3.8 V nominal voltage that weighs 2.3 oz and is rated for over 500 charge cycles. It is IP68-rated and has an operating temperature range of 32ºF to 113ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

PoC

PNC550

High-Capacity Lithium-Polymer Battery

The Hytera BP4006 Lithium-Polymer Battery is engineered for reliable and long-lasting operation. This battery delivers up to 24 hours of performance on a single charge with a 5/5/90 duty cycle. The BP4006 pairs with the PNC380S PoC Radio. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BP4006 is a 4000 mAh Lithium-Polymer smart battery with a 3.8 V nominal voltage that weighs 2.3 oz and is rated for over 500 charge cycles. It has an operating temperature range of 32ºF to 113ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

PoC

PNC380S

High-Capacity Lithium-Polymer Battery

The Hytera BP4008 Lithium-Polymer Battery is engineered for reliable and long-lasting operation. The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. This battery delivers over 48 hours of performance on a single charge with a 10/10/80 duty cycle. The BP4008 pairs with the PNC360S PoC Radio. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BP4008 is a 4000 mAh Lithium-Polymer smart battery with a 3.8 V nominal voltage that weighs 2.3 oz and is rated for over 500 charge cycles. It has an operating temperature range of 32ºF to 113ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

PoC

PNC360S

High-Capacity IP68-Rated Lithium-Polymer Battery

The Hytera BP4901 Lithium-Polymer Battery is engineered for reliable and long-lasting operation. This battery delivers up to 15 hours of performance on a single charge with a 5/5/90 duty cycle. The BP4901 pairs with the rugged PNC560 PoC Mobile Computer. This smart battery includes advanced technology that optimizes battery performance and longevity including: Extended Battery Life: The smart battery provides key parameters to optimize the charging curve, extend battery lifespan, and maximize its performance over many charge cycles. Enhanced Safety: Built-in smart technology actively manages the charge and discharge processes, preventing overcharging, overheating, and other hazardous conditions. The BP4901 is a 5040 mAh Lithium-Polymer smart battery with a 3.8 V nominal voltage that weighs 2.8 oz and is rated for over 500 charge cycles. It is IP68-rated and has an operating temperature range of -4ºF to 140ºF. IMPORTANT NOTICES BATTERY REPLACEMENT: For optimal performance and reliability, it is recommended to replace two-way radio batteries every two years or when a noticeable decrease in operating time occurs. BATTERY CHARGING: To maximize performance, always turn radios OFF before charging. Leaving them on can degrade the battery and may void your warranty. To ensure reliability and protect your investment, use only genuine Hytera batteries with your Hytera DMR and PoC radios. The use of unapproved third-party batteries may cause damage to your radio and will void the warranty.

PoC

PNC560

Secure In-Vehicle Mounting for Mobile Radios

The Hytera BRK08 Mounting Kit is designed to provide secure, professional in-vehicle installation for compatible Hytera mobile radios. Built for commercial fleets, transportation vehicles, utilities, construction, and public safety applications, the BRK08 ensures radios remain firmly positioned in demanding operating environments where stability and reliability are critical. Engineered for durability, the BRK08 mounting kit helps reduce vibration-related movement that can impact performance over time. A properly secured mobile radio protects internal components, minimizes strain on power and antenna connections, and supports long-term system dependability. For two-way radio dealers and B2B buyers, this means fewer service issues, cleaner installations, and greater customer satisfaction across fleet deployments.

H-Series

HM782

Built-In Duplexer Installation Kit

Aluminium bracket and hardware for installation of the duplexer

iSeries

RD982iS

Installation Kit for Power Pack (Black)

Installation of up to two external power packs (PS22002) in a 19" equipment rack

H-Series

HR1062

Rack Mount Kit for Power Supply Equipment

The Hytera BRK14 Kit provides a professional rack installation solution for up to two compatible external power packs such as the PS22002 in a standard 19″ equipment rack. Built for communications rooms, repeater sites, or control cabinets, this installation accessory delivers organized and secure mounting that supports clean infrastructure deployment. Its durable construction ensures power supplies remain securely seated, reducing connection strain and supporting reliable system performance.

iSeries

RD982iS

DIN In-Dash Mount Solution for Mobile Radios

The Hytera BRK15 In-Dash Mounting Kit is designed to fit standard DIN dashboard openings and provide a stable platform for compatible mobile radios or related communication devices. Its precision mount supports secure installation in vehicles, preventing equipment movement and enhancing operator access. This accessory is an essential part of professional mobile radio installations where dashboard space is used for fixed radio placement.

iSeries

MD782i

Secure Mounting for Repeaters

The Hytera BRK16 Installation Kit is designed to provide a secure mounting solution for duplexer units on select DMR repeater platforms. This accessory enables professional alignment and secure attachment of duplexer components, supporting dependable repeater operation. It is built to withstand environmental variation while maintaining stable mechanical performance inside equipment racks or shelter rooms.

iSeries

RD982iS

Wall Bracket

Wall bracket for power adapter (PS22002), two-rack unit, black.

iSeries

RD982iS

Wall Mount Bracket for Communications Equipment

The Hytera BRK20 Wall Mount Bracket securely installs multi-unit charger trays in a fixed vertical position, supporting models including the MCA08 and MCL19. By mounting chargers to the wall, this accessory frees up desk and counter space while keeping charging pockets easily accessible. It is ideal for communication centers, dispatch locations, and fleet operations that require organized charger installations.

iSeries

RD982iS

Wall Mount for Multi-Unit Charging Trays

The Hytera BRK20 Wall Mount Bracket securely installs multi-unit charger trays in a fixed vertical position, supporting models including the MCA08 and MCL19. By mounting chargers to the wall, this accessory frees up desk and counter space while keeping charging pockets easily accessible. It is ideal for communication centers, dispatch locations, and fleet operations that require organized charger installations.

H-Series, iSeries

HP602, HP682, HP702, HP702, HP782, HP782, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PD982i, PD982i

Secure Mounting Bracket for Mobile Radios

The Hytera BRK29 Mounting Bracket is engineered for secure installed placement of compatible mobile radios. The accessory includes the bracket, pad, knobs, and screws needed for professional installation. It provides stable, vibration-resistant support that helps protect equipment connections and maintains reliable performance in mobile or fixed installations.

iSeries

MD612i, MD622i

Secure Mounting for MNC360 PoC mobile two-way radios.

The Hytera BRK33 Mounting Bracket provides a reliable installation solution for the MNC360 PoC Mobile Radios. This bracket supports stable positioning, helping reduce equipment movement and supporting dependable daily communications performance.

PoC

MNC360

Wall or Rack Mount Bracket for Radio Accessories

The Hytera BRK36 Mounting Bracket supports secure attachment of compatible compact DMR repeaters including the HR652 . It provides stable, vibration-resistant mounting in radio rooms or equipment closets.

H-Series

HR652

Protective Case with Mounting Bracket

Protective Case with Mounting Bracket PNC560

PoC

PNC560

Secure Mounting Solution for DMR Mobile Radios

The Hytera BRK44 Mounting Bracket provides a dependable installation platform for H-Series entry-level DMR mobile radios including the HM652 and HM682. It supports secure, vibration-resistant mounting that helps maintain stable equipment positioning.

H-Series

HM652, HM652

Charger for TC--320 Handheld Radio Lithium-Ion Batteries

The Hytera CH05L01 is a single-unit desktop charger built for the TC-320 Analog Radio. With smart charging technology, it quickly restores battery life and automatically adjusts to the battery type for safe and efficient charging. Delivering a maximum charging current of 600 mA, it provides steady power to keep radios charged and ready when needed. Measuring just 3.2 x 2.9 x 1.6 inches and weighing about 2.5 oz, the CH05L01 is compact and lightweight, making it easy to keep on a desk or workstation without taking up valuable space. The simple drop-in design charges one radio or battery at a time, giving users a straightforward way to stay powered up while helping to extend battery health. A separate power supply (PS0602) is required and available separately. Practical and dependable, this charger is a convenient choice for keeping radios operational day after day.

HYT

TC-320

Compact Desktop Smart Charger for Lithium-Ion Batteries and Radios

The Hytera CH10A07 is a single-unit desktop charger built for iSeries radios. With smart charging technology, it quickly restores battery life and automatically adapts to the battery type for safe and efficient charging. Delivering a maximum charging current of 1000 mA, it provides steady power to keep radios charged and ready when needed. Measuring just 3 x 3 x 1.8 inches and weighing about 2.5 oz, the CH10A07 is compact and lightweight, making it easy to keep on a desk or workstation without taking up valuable space. The simple drop-in design charges one radio or battery at a time, giving users a straightforward way to stay powered up while helping to extend battery health. A separate power supply (PS1014) is required and available separately. Practical and dependable, this charger is a convenient choice for keeping radios operational day after day.

iSeries

PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PD982i, PD982i

Compact Desktop Charger for Lithium-Ion Batteries

Hytera CH10L19 is a single-unit desktop charger built for the TC-508 and discontinued TC-580 analog radios. With smart charging technology, it quickly restores battery life and automatically adapts to the battery type for safe and efficient charging. Delivering a maximum charging current of 800 mA, it provides steady power to keep radios charged and ready when needed. Measuring just 3.2 x 2.9 x 1.6 inches and weighing about 2.5 oz, the CH10L19 is compact and lightweight, making it easy to keep on a desk or workstation without taking up valuable space. The simple drop-in design charges one radio or battery at a time, giving users a straightforward way to stay powered up while helping to extend battery health. A separate power supply (PS1014) is required and available separately. Practical and dependable, this charger is a convenient choice for keeping radios operational day after day. NOTE: This accessory can be purchased from Authorized Hytera US Dealers and is used with the TC-580 End of Life (EOL) radio that is no longer available.

HYT

TC-508

Rapid-Rate Charger (without adapter)

Rapid-rate charger (without adapter) designed to charge lithium-ion batteries from the PD3i series

iSeries

PD362i

Compact Desktop Charger for Lithium-Ion Batteries

The Hytera CH10L22 is a dual-pocket desktop charger built for the BD302i DMR Two-Way Radio. Delivering a maximum charging current of 850 mA, it provides steady power to keep radios charged and ready when needed. Measuring just 3 x 2.9 x 1.4 inches and weighing about 2.5 oz, the CH10L22 is compact and lightweight, making it easy to keep on a desk or workstation without taking up valuable space. The simple drop-in design charges one radio and a battery at the same time, giving users a straightforward way to stay powered up while helping to extend battery health. A separate power supply (PS1030) is required and available separately. Practical and dependable, this charger is a convenient choice for keeping radios operational day after day.

H-Series, iSeries

BD302i

Rapid-Rate Desktop Charger for iSeries DMR Radios

The Hytera CH10L23 is a single-unit desktop charger built for the BD502i, BD552i, and BD612i DMR Two-Way Radios. Delivering a maximum charging current of 800 mA, it provides steady power to keep radios charged and ready when needed. Measuring just 2.7 x 2.7 x 1.6 inches and weighing about 2.5 oz, the CH10L23 is compact and lightweight, making it easy to keep on a desk or workstation without taking up valuable space. The simple drop-in design charges one radio or battery at a time, giving users a straightforward way to stay powered up while helping to extend battery health. A separate power supply (PS1014) is required and available separately. Practical and dependable, this charger is a convenient choice for keeping radios operational day after day.

iSeries

BD502i, BD552i, BD612i

Compact Desktop Charger for PD362i Radios

The Hytera CH10L24 is a dual-pocket desktop charger built for the PD362i Compact DMR Radio. Delivering a maximum charging current of 900 mA, it provides steady power to keep radios charged and ready when needed. Measuring just 3 x 2.9 x 1.4 inches and weighing about 2.5 oz, the CH10L24 is compact and lightweight, making it easy to keep on a desk or workstation without taking up valuable space. When used in conjunction with the PD362i Contact-Charge Battery Cover (POA129), the simple drop-in design lets users charge one radio and one battery at the same time. A separate power supply (PS1030) is required and available separately. Practical and dependable, this charger is a convenient choice for keeping radios operational day after day.

iSeries

PD362i

Smart Charging for Hytera H-Series Handheld Radios

The Hytera CH10L30 Smart Single-Unit Charger delivers safe, efficient, and intelligent charging for Hytera H-Series two-way handheld radios and batteries. Designed with a maximum charging current of 1000 mAh, it restores battery power quickly while ensuring consistent performance throughout the charging cycle. Safety is at the core of the CH10L30 design. It features multiple protection mechanisms, including over-temperature, overvoltage, overcurrent, and short-circuit protection, allowing batteries to charge safely even in unattended mode. This reduces the need for constant supervision and helps lower labor costs while maintaining full safety assurance.

H-Series

HP602, HP682, HP702, HP702, HP782, HP782

Wireless Charger for PD362i

Wireless lithium-ion battery charger for PD362i

iSeries

PD362i

Dual Pocket Charger

Dual Pocket Charger 5VDC, 2A Li-ion battery and Li-polymer battery

PoC

PNC550

Dual pocket charger

Dual pocket charger VM780

PoC

VM780

Dual pocket charger

Dual Pocket Charger for Li-ion Batteries PNC370

PoC

VM780

Dual-Pocket Charging for the Hytera PNC560

The Hytera CH20L19 is a compact and efficient desktop charger designed specifically for the Hytera PNC560 PoC Mobile Computer. With dual charging pockets and a maximum charging current of 3000 mAh, it provides fast charging for a PNC560 PoC device and a PNC560 battery. Measuring 3.9 x 3 x 1.9 in, the CH20L19 offers a small footprint that fits easily on any desk or workstation. Its smart dual-slot design allows users to charge the PNC560 radio and an additional battery simultaneously, ensuring both are ready for use at the start of every shift.

PoC

PNC560

12 VDC Power Adapter for Charging Two-Way Radios in Vehicles

The Hytera CHV09 Vehicle Charger Adapter provides power for Hytera H-Series and iSeries single-unit chargers for charging compatible Hytera portable radios in vehicles. Designed for use with a standard 11–25 VDC vehicle outlet (via cigarette lighter), it provides a safe and efficient charging option for users on the move. Note that the CHV09 provides power to the single unit charger and does not plug directly into the radio.

H-Series, HYT, iSeries

BD502i, BD552i, BD612i, HP602, HP682, HP702, HP702, HP782, HP782, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PD982i, TC-508

CK10 Vehicle Installation Kit | Hytera US

The CK10 Car Kit is a rugged vehicle mounting assembly that enables the PNC380S to be installed on a vehicle dashboard and comply with DOT safety requirements. The Car Kit allows the PNC380S to be easily removed for handheld job-site communications. It features a locking bracket, an on/off power button, and ports for an external speaker, microphones, and other accessories. The Car Kit also functions as a docking charger for the PNC380S. It includes a locking kit and key, dash-mounting hardware, and two-wire DC power cable. Additional optional accessories for the CK10 Car Kit include the SM18A3 handheld microphone, the POA77 visor microphone, and the SM09S1 external speaker.

PoC

PNC380S

DMR Extended Warranty

Extend the protection of your Hytera DMR radios with an extended warranty designed to maximize uptime and protect your investment. The Extended DMR Warranty adds two years to the standard three year warranty for a total to five years of coverage. This added protection ensures factory-authorized repairs, streamlined RMA processing, and dependable service through Hytera US Inc’s certified repair facilities. Extended coverage helps reduce unexpected repair costs and keeps your operations running without interruption. All Hytera DMR handheld two-way radios, mobile radios, and repeaters are eligible for the DMR Extended Warranty.  Contact your Authorized Hytera Dealer for more information.

H-Series, iSeries

BD302i, BD502i, BD552i, BD612i, HM782, HP602, HP682, HP702, HP702, HP782, HP782, HR1062, MD612i, MD622i, PD362i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PD982i, PD982i

Covert Acoustic Tube with Push-to-Talk Button and Compact Microphone

The Hytera EAN18 is a premium 3-wire surveillance kit featuring a discreet earpiece with a transparent acoustic tube, a compact microphone, and a handheld, torpedo-style push-to-talk (PTT) button. The EAN18 attaches securely to the radio using a 6-Pin connector and thumb screw, preventing unintended detachment and minimizing connector wear. From this connection, a short cable runs to a junction, splitting into three distinct leads: a 42” wire extending to the PTT button, a 14” wire linking to the microphone, and an 18” wire connecting to the acoustic tube via the transducer. The wiring tucks discreetly within clothing for seamless concealment, making it perfect for covert and surveillance applications. A soft silicone earbud provides extended comfort, while the transparent acoustic tube ensures clear audio transmission and can be replaced when necessary. The miniature microphone includes a brooch-style pin for secure placement under a collar or lapel. The EAN18 meets IP54 compliance, providing protection against dust and water splashes. With an operating temperature range of -4ºF to 140ºF, it delivers reliable performance in diverse and rugged conditions.

iSeries

PD702i, PD782i, PD982i, PD982i

Transparent Acoustic Tube, Torpedo Push-to-Talk Button, and Under Collar Microphone Audio Accessory

The Hytera EAN21-P is a high-performance, 3-wire surveillance kit featuring an earpiece with a transparent acoustic tube, concealable microphone, and a hand-held, torpedo-style push-to-talk (PTT) button. The EAN21-P attaches securely to the radio through a 13-Pin connector and thumb screw, preventing accidental detachment while minimizing wear on the connector. From this connection, a short cable runs to a junction, where it branches into three distinct leads: a 42” wire extending to the PTT button, a 14” wire linking to the microphone, and an 18” wire connecting to the acoustic tube via the transducer. The wiring hides discreetly within clothing for seamless concealment, making it perfect for covert and surveillance applications. A soft silicone earbud provides lasting comfort, and the nearly invisible transparent acoustic tube ensures clear audio transmission and can be replaced if necessary. The miniature microphone includes a brooch style pin for securing under a collar or lapel. For operation in hazardous environments where explosive dust or gas exists, this accessory supports intrinsic safety when used with Hytera H-Series Intrinsically Safe two-way radios. Its design eliminates the risk of sparks or energy discharge, thereby meeting vital safety and compliance standards.

H-Series

HP702, HP782

Transparent Acoustic Tube Earpiece with Inline Push-to-Talk Button and Microphone

The Hytera EAN24-P is a durable, 2-wire surveillance earpiece with transparent acoustic tube, and an inline PTT button featuring an integrated microphone. The unit securely attaches to the two-way radio via a 13-Pin connector and thumb screw, preventing accidental disconnection while reducing wear on the device. From this connection, an 8” wire runs to a splitter, branching into a 40” wire leading to the microphone and a 42” wire extending to the acoustic tube through the transducer. The soft silicone earbud offers all-day comfort, while the ultra-discreet transparent acoustic tube delivers crisp, clear audio, making it ideal for covert and surveillance operations. The transducer assembly is equipped with a riveted metal clip ensuring secure placement on clothing during use. The detachable acoustic tube simplifies cleaning and allows for easy sharing between users. This accessory is intrinsically safe when combined with Hytera H-Series Intrinsically Safe two-way radios, assuring compliance with rigorous safety standards. It's engineered to eliminate any risk of sparks or dangerous energy release, making it ideal for environments with explosive dust or gas. The EAN24-P has a sleek design that allows for hands-free communication when used with Hytera H-Series two-way radios (when VOX is enabled). This means the microphone automatically starts transmitting when you begin speaking, always ready to detect sound above a set frequency threshold, unlike a manual PTT button.

H-Series

HP602, HP682, HP702, HP702, HP782, HP782

Transparent Acoustic Tube with Earpiece Audio Accessory

The Hytera EAS03 is a receive-only earbud with transparent acoustic tube audio accessory designed for use with Hytera H-Series handheld two-way radios paired with remote speaker microphones. Designed for all-day wear, its soft silicone earbud provides exceptional comfort, while the transparent acoustic tube discreetly delivers clear audio, making it perfect for covert and surveillance applications. The transducer housing includes a durable metal clip and a removable acoustic tube, making cleaning and replacement effortless. Additionally, a quick-release radio connector wire enhances flexibility, allowing for seamless transitions when changing or upgrading radios.

H-Series, iSeries

BD502i, BD552i, BD612i, HP602, HP682, HP702, HP782, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD982i

Transparent Acoustic Tube Audio Accessory with PTT Button and Microphone

The Hytera EAS07 is a high-performance surveillance earpiece featuring a transparent acoustic tube earpiece, an in-line PTT button, and an integrated microphone. Designed for all-day wear, its soft silicone earbud provides exceptional comfort, while the transparent acoustic tube discreetly delivers clear audio, making it perfect for covert and surveillance applications. The transducer housing is equipped with a rugged metal clip for secure attachment to clothing, a detachable acoustic tube for easy cleaning or replacement, and a quick-release radio connector for fast, hassle-free transitions during upgrades or equipment changes.

PoC

PNC360S, PNC380S, PNC550

Heavy Duty, Noise-Canceling Headset with Push-to-Talk and Boom Microphone

The Hytera ECN18 is a Noise-Canceling Headset that ensures crystal-clear communication and noise protection in very loud environments, including industrial worksites, transportation hubs, and airports. A 36” coiled cord attaches to the radio using a secure 16-Pin connector and thumb screw, preventing accidental detachment and minimizing wear on the connector. This heavy-duty headset features thick, foam ear pads and an adjustable, padded headband for all-day comfort. The oversized Push-to-Talk (PTT) button on the ear cup allows for seamless operation—even when wearing gloves.

iSeries

PD702i, PD782i, PD982i, PD982i

Heavy Duty, Noise-Canceling Headset with Push-to-Talk and Boom Microphone

The Hytera ECN48-P is a noise-canceling over-the-head headset that ensures crystal-clear communication and noise protection in very loud environments, including industrial worksites, transportation hubs, and airports. A 36” coiled cord attaches to the radio using a secure 13-Pin connector and thumb screw, preventing accidental detachment and minimizing wear on the connector. This heavy-duty headset features thick, foam ear pads and an adjustable, padded headband for all-day comfort. The oversized Push-to-Talk (PTT) button on the ear cup allows for seamless operation—even when wearing gloves.

H-Series

HP602, HP682, HP702, HP782

Heavy Duty, Noise-Canceling Headset with Push-to-Talk and Boom Microphone

The Hytera ECN49-P is a Heavy-Duty Noise-Canceling Headset with headband that ensures crystal-clear communication and noise protection in very loud environments, including industrial worksites, transportation hubs, and airports. A popular choice for industrial and heavy equipment operations requiring hard hat compatibility, the behind-the-head headsets use a neckband and an adjustable top Velcro strap to stay secure without interfering with a hard hat suspension system. A 36” coiled cord attaches to the radio using a secure 13-Pin connector and thumb screw, preventing accidental detachment and minimizing wear on the connector. This heavy-duty headset features thick, foam ear pads and an adjustable, padded headband for all-day comfort. The oversized Push-to-Talk (PTT) button on the ear cup allows for seamless operation—even when wearing gloves.

H-Series

HP602, HP682, HP702, HP782

Heavy-Duty Hard Hat Headset with Noise-Cancelling Microphone

The Hytera ECN50-P is a heavy-duty hearing protection headset designed for helmet-mounted use in high-noise work environments. Equipped with built-in speakers and a noise-cancelling microphone, this headset enables clear two-way radio communication while protecting the user’s hearing during demanding operations. The ECN50-P features clips that securely connect the ear cups to standard hard hat headset slots and ensure consistent comfort and clear communication over long shifts. The ear cups can be lifted for easy transitions in and out of noisy areas without removing the hard hat. With a Noise Reduction Rating (NRR) of up to 27 dB, the ECN50-P significantly reduces surrounding noise, allowing users to maintain situational awareness while communicating effectively. A 36” coiled cord attaches to the radio using a secure 13-Pin connector and thumb screw, preventing accidental detachment and minimizing wear on the connector.

H-Series

HP602, HP682, HP702, HP782

Earpiece with Behind-the-Ear C-Style Hook Audio Accessory Paired with Audio Cables with Push-to-Talk and Microphone

The Hytera EH-01 is a receive-only, behind-the-ear C-style hook audio accessory designed for use with audio accessory cables that connect to the radio and provide an integrated Push-to-Talk (PTT) button with a microphone (MIC). The EH-01 hooks securely behind the ear while the ergonomic earpiece sits just outside the ear canal for comfortable use. The detachable silicone rubber earpiece swivels for use in the left or right ear. Long and short detachable silicone rubber earpieces ship with the EH-01 for flexible use and comfort based on the user preference. The EH-01 can be paired with one of the following audio accessory cables with PTT/MIC:

H-Series, iSeries

BD302i, BD502i, BD552i, BD612i, HP602, HP682, HP702, HP702, HP782, HP782, PD362i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PD982i, PD982i

Over-the-Ear Earpiece with Swivel Hook Audio Accessory Paired with Audio Cables with Push-to-Talk and Microphone

The Hytera EH-02 is a receive-only, behind-the-ear C-style hook audio accessory designed for use with audio accessory cables that connect to the radio and provide an integrated Push-to-Talk (PTT) button with a microphone (MIC). The EH-02 hooks securely behind the ear, and the ergonomic earpiece sits just outside the ear canal for comfortable use. The C-style hook can swivel for use in the left or right ear. The EH-02 can be paired with one of the following audio accessory cables with PTT/MIC:

H-Series, iSeries

BD302i, BD502i, BD552i, BD612i, HP602, HP682, HP702, HP702, HP782, HP782, PD362i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PD982i, PD982i

Audio Accessory with Push-to-Talk Button and Microphone for iSeries Radios

The Hytera EHM15-A is a D-style earpiece engineered for clear, comfortable communication in demanding environments. Designed for compatibility with iSeries DMR radios, it features an in-line Push-to-Talk (PTT) button with a built-in microphone, plus a convenient VOX (Voice-Operated Exchange) toggle switch for hands-free operation. This functionality allows the microphone to activate automatically when speech is detected, transmitting only while the user is speaking and disengaging when silent. Ideal for professionals who require all-day comfort and discreet audio performance, the EHM15-A rests securely over either ear, reducing fatigue during extended use. The 36-inch audio cable is equipped with a dual-Pin connector that secures to the radio via a locking thumb screw, minimizing the chance of accidental disconnection during active shifts. With a combination of durable construction, intuitive controls, and voice-activated transmission, the Hytera EHM15-A is a practical solution for users who depend on seamless, low-profile communication.

HYT, iSeries

BD502i, BD552i, BD612i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, TC-508

Earpiece with Behind-the-Ear C-Style Hook with Inline Push-to-Talk Button and Microphone

The Hytera EHN26-P is a behind-the-ear C-style hook audio accessory. The EHN26-P hooks securely behind the ear, and the ergonomic earpiece sits just outside the ear canal for comfortable use. The detachable silicone rubber earpiece swivels for use in the left or right ear. Long and short detachable silicone rubber earpieces are included for flexible use and comfort based on user preferences. This accessory offers intrinsic safety when used alongside Hytera H-Series Intrinsically Safe two-way radios. Its core design principle is to eliminate the potential for sparks or excessive energy discharge, thereby ensuring full compliance with stringent safety standards necessary for environments containing explosive dust or gas. The EHN26-P provides the functions of a Push-to-Talk (PTT) button and microphone (MIC), equipped with circuitry designed to support Voice-Operated Exchange (VOX). The low-profile design provides discreet hands-free communication and enables VOX functionality with Hytera H-Series two-way radios when VOX is enabled. VOX automatically initiates transmission when the user begins speaking, eliminating the need for manual activation. Unlike the PTT button, the VOX microphone remains ready to transmit, detecting sound that exceeds a predefined frequency threshold.

H-Series

HP702, HP782

Behind-the-Ear Audio Accessory with Push-to-Talk Button and Microphone

The Hytera EHS12-A is a behind-the-ear, C-style hook audio accessory equipped with an in-line Push-to-Talk (PTT) button and microphone (MIC). Its secure, ergonomic design hooks comfortably behind the ear, while the foam-covered earpiece rests just inside the ear canal for extended use. The adjustable earpiece swivels to accommodate both left and right ear placement. A 2.5 mm audio jack connects the 36” cable to the radio, which features an integrated PTT/MIC unit and a durable clip for secure attachment to a vest or clothing. A lanyard positioned near the audio jack offers an additional connection point, allowing users to loop the cable to the radio to minimize interference and maintain a streamlined setup.

HYT

TC-320

Behind-the-Ear Earpiece with Integrated PTT Button and Microphone

The Hytera EHS16 is a behind-the-ear C-style hook audio accessory designed with an in-line Push-to-Talk (PTT) button and microphone (MIC). The EHS16 hooks securely behind the ear while the ergonomic earpiece sits just outside the ear canal for comfortable use. The detachable silicone rubber earpiece swivels for use in the left or right ear. Long and short detachable silicone rubber earpieces ship with the EHS16 for flexible use and comfort based on user preference.

iSeries, PoC

BD302i, PD362i, VM780

Durable Over-the-Ear Audio Accessory with PTT Button and Microphone

The Hytera EHS26R is an over-the-ear C-style hook audio accessory designed with in-line Push-to-Talk (PTT) button and microphone (MIC). The compact and lightweight EHS26R hooks securely over the right ear for comfortable, all-day long use. A durable clip keeps the microphone securely attached to the user’s clothing for clear audio transmission. This earpiece meets IP54 compliance, providing reliable protection against dust and splashing or spraying water. A universal 3.5 mm audio connector supports quick radio swaps across compatible Hytera two-way radios, making deployment and maintenance fast and hassle-free.

PoC

PNC360S, PNC380S, PNC560, PNC560S

Comfortable C-Style Audio Accessory with Push-to-Talk Button and Microphone

The Hytera EHS30 is a C-style hook audio accessory engineered for comfort and reliability. It fits securely behind the ear, with an ergonomic earpiece that rests just outside the ear canal. The detachable silicone rubber tip swivels for left- or right-ear use, and both long and short earpieces are included to suit individual preferences. A durable clip keeps the microphone firmly attached to clothing for consistent, clear audio transmission. In addition to its ergonomic design, the EHS30 features an in-line Push-to-Talk (PTT) button with integrated microphone (MIC) for discreet, one-handed operation and crystal-clear communication. The 3.5 mm audio connector supports quick radio swaps across compatible Hytera two-way radios, making deployment and maintenance fast and hassle-free.

PoC

PNC360S, PNC380S, PNC550

C-style earset

C-style earset with USB port

PoC

VM780

High-Performance Wireless Headset with Noise Cancellation

The Hytera EHW08 Bluetooth Headset combines advanced Bluetooth connectivity with a precision-engineered boom microphone system for exceptional audio clarity. Featuring an omnidirectional noise-canceling microphone, it effectively filters ambient noise, ensuring clear communication even in high-noise environments. Designed specifically for professional applications, the EHW08 consistently delivers reliable audio quality that teams depend on for mission-critical communication tasks. With up to 5 hours of continuous talk time and 17 hours of standby capability after just a 2.5-hour charge (charging cable included), the EHW08 offers reliable performance throughout your workday. Bluetooth technology provides a stable, low-latency connection to your radio, complemented by intuitive controls such as a dedicated Push-to-Talk (PTT) button and volume adjustment rocker, allowing effortless one-handed operation. Ergonomically designed to comfortably fit either the left or right ear, this lightweight headset remains secure and comfortable for all-day wear. Its compact, wireless construction frees users from cable constraints, enabling hands-free mobility, while intuitive controls allow swift engagement of PTT and quick volume adjustments. Ideal for dynamic or stationary roles, the Hytera EHW08 enhances workflow efficiency and maintains uninterrupted communication.

H-Series, PoC

HP602, HP682, HP702, HP782, MNC360, PNC360S, PNC550

Black Earbud Audio Accessory Paired with Audio Cables with Push-to-Talk and Microphone

The Hytera ES-01 is a receive-only black earbud audio accessory designed for use with audio accessory cables that connect to the radio and provide an integrated Push-to-Talk (PTT) button with a microphone (MIC). The ES-01 can be paired with one of the following audio accessory cables with PTT/MIC: The ES-01 is ergonomic for comfortable use over long periods of time. It includes a coiled cord that extends up to 26”, an adjustable clip for attachment to clothing, and three silicone-rubber earbud covers.

H-Series, HYT, iSeries

BD302i, BD502i, BD552i, BD612i, HP602, HP682, HP702, HP702, HP782, HP782, PD362i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PD982i, PD982i, TC-508

Transparent Acoustic Tube with Earpiece Audio Accessory Paired with Audio Cables with Push-to-Talk and Microphone

The Hytera EA-01 is a receive-only earbud with transparent acoustic tube audio accessory designed for use with audio accessory cables that connect to the radio and provide an integrated Push-to-Talk (PTT) button with a microphone (MIC). Its ergonomic design features a silicone earbud which ensures lasting comfort, even during extended use. The transparent acoustic tube enables discreet audio reception for surveillance applications. The EA-01 can be paired with one of the following audio accessory cables with PTT/MIC:

H-Series

HP602, HP682, HP702, HP702, HP782, HP782

Compact and Comfortable Wireless Audio Accessory

The Hytera ESW01 is a compact, wireless earpiece audio accessory giving the user freedom of movement without the limitations of traditional wired earpieces. Leveraging Bluetooth technology, this earpiece is compatible with Hytera handheld DMR radios. A compact charger is included with the ESWO1. For hassle free charging via PC or laptop, use the Hytera PS1030 Power Adapter (available separately), or any compatible aftermarket micro-USB charger. Three interchangeable rubber ear cushions and an adjustable earhook ensure a secure, personalized fit.

H-Series, iSeries

BD502i, BD552i, BD612i, HP602, HP682, HP702, HP782, PD402i, PD482i, PD982i

External GPS Antenna with 9.8 ft Cable for Fleet and Base Station Use

The Hytera GPS04 is a high-sensitivity GPS antenna engineered to provide precise satellite positioning for Hytera mobile radios, repeaters, and communication systems. Operating at 1575MHz and equipped with an SMA connector, this module supports accurate geolocation features including fleet tracking, geofencing, and route monitoring. With a 9.8-foot cable for flexible mounting, the GPS04 antenna is ideal for vehicle installations and fixed-location systems such as the MD782i, MD622i, MD652i, HM782, MNC360, and the HR652. Rugged construction and weather-resistant design ensure performance in both mobile and stationary applications. The GPS04 is essential for operations that rely on real-time location awareness and efficient dispatch.

H-Series, iSeries, PoC

HM782, MD612i, MD622i, MNC360

Hytera PoC Protection Plan

The Hytera PoC Protection Plan is designed to safeguard your investment and keep your operations running without interruption. This extended protection plan covers one accidental damage incident within two years of the original purchase, helping reduce unexpected repair costs and minimizing device downtime. To be eligible, the plan must be purchased at the time of your initial PoC device purchase. In the event of damage, the customer is responsible for shipping the unit to Hytera US Inc. Hytera US Inc will cover return shipping via two-day air. The plan does not cover units with signs of intentional abuse or tampering. For organizations that rely on continuous, reliable communication, adding the Hytera PoC Protection Plan is a practical way to protect your devices, control maintenance costs, and maintain operational efficiency. Contact your Authorized Hytera Dealer for more information.

PoC

PNC560S, PNC3630S, PNC380S, MNC360, PNC560

Protective Leather Case for Hytera Portable Radios

The Hytera LCY003 is a protective carry case with a swivel belt clip designed to shield your iSeries PD7 two-way radio from everyday bumps and scratches while keeping the controls accessible and the audio clear. Built for daily field use, it offers a snug fit with secure attachment to your belt or harness, so the radio stays protected and easy to reach throughout the shift.

iSeries

PD702i, PD752i, PD782i

Protective Form-Fit Leather Case for Hytera Radios

The Hytera LCY006 is a durable, form-fitting carrying case that helps protect your radio from bumps and scratches while keeping the screen, keys, and audio clear and accessible. It secures to your belt or harness for quick access when it is time to communicate, making it an invaluable accessory for everyday operations.

iSeries

PD702i, PD782i, PD982i

Leather Carring Case

Leather Carrying Case with LCD display and keypad, for thin battery

iSeries

PD982i

Protective Form-Fit Leather Case for Daily Operations

The Hytera LCY025 is a rugged, form-fit carry case that helps shield your HP702 and HP782 H-Series radios from bumps and scratches while keeping the screen, keys, and audio unobstructed. It attaches securely to a belt with the metal latch belt clip or can be carried with the over-the-shoulder strap. The LCY025, holds the radio steady during movement, and lets users access controls quickly, making it a practical choice for on-the-go teams.

H-Series

HP702, HP782

Leather Case and Carrying Strap for HP7 Intrinsically Safe Radios

The Hytera LCY026 is a durable, form-fit carry case designed to guard your HP702-IS and HP782-IS H-Series radios from bumps and scratches without blocking the screen, keys, or audio. It secures to a belt or included leather harness strap for confident carrying and lets you reach the controls quickly, making it a practical choice for teams that need dependable protection and easy operation throughout the shift.

H-Series

HP702, HP782

Desktop/Wall mount Charger with Power Supply

The Hytera MCA08 is a rapid-rate charging solution designed to charge up to six H-Series Handheld DMR radios and select iSeries radios at the same time (or batteries removed from radios). Using intelligent charging technology, it automatically detects the battery type and adjusts for safe, efficient charging, helping to extend overall battery life. Each pocket provides reliable current for consistent performance across all units, reducing downtime and keeping entire teams ready for action. Built to Hytera’s high standards and certified for safety and quality, the MCA08 provides a dependable and practical solution for organizations that require efficient multi-radio charging in one streamlined unit.

iSeries

PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PD982i, PD982i

Centralized Charging, Maintenance, and Battery Management Solution

The Hytera MCA26 is a multi-unit smart charger for up to 8 radios or 8 batteries. It can analyze, test, and monitor battery health to extend battery life. Set batteries to storage mode for long term storage or recondition batteries to restore battery capacity. The MCA26 features an LCD display and keypad.

H-Series

HP602, HP682, HP702, HP782

Desktop/Wall mount Charger with for BD552i, BD502i, BD612

The Hytera MCL19 is a multi-unit charging solution designed to charge up to six Hytera portable radios or batteries (removed from radios) at the same time. Each pocket provides reliable current for consistent performance across all units, reducing downtime and keeping entire teams ready for action. Built to Hytera’s high standards and certified for safety and quality, the MCL19 is compatible with Hytera BD552i, BD502i, and BD612 DMR Two-Way Radios. It is a dependable and practical solution for organizations that require efficient multi-radio charging in one streamlined unit. Instead of juggling multiple power supplies, users can charge radios or batteries in one location, simplifying radio charging for multiple users between shifts and ensuring devices are always organized and fully charged.

iSeries

BD502i, BD552i, BD612i

Simultaneous Charging and Data Management for Professional Radio Fleets

The Hytera MCL30 Multi-Unit Charger with Data Interface is designed to streamline charging and device management for professional radio fleets. Capable of charging multiple radios or batteries simultaneously, the MCL30 helps reduce downtime and improve operational readiness across teams. Its integrated data interface enables programming and configuration while devices are docked, simplifying maintenance and deployment processes. Ideal for logistics, transportation fleets, utilities, and enterprise operations; the MCL30 supports centralized device management in high-volume environments. Its durable construction and organized charging layout make it well suited for dispatch centers, equipment rooms, and staging areas. By combining efficient multi-unit charging with data functionality, the Hytera MCL30 enhances workflow efficiency and fleet performance.

PoC

VM780

Desktop/Wall mount Charger with Power Supply

The Hytera MCL39 is a multi-unit charging solution designed to charge up to six Hytera portable radios or batteries (removed from radios) at the same time. Using intelligent charging technology, it automatically detects the battery type and adjusts for safe, efficient charging, helping to extend overall battery life. Each pocket provides reliable current for consistent performance across all units, reducing downtime and keeping entire teams ready for action. Built to Hytera’s high standards and certified for safety and quality, the MCL39 is compatible with a wide range of Hytera DMR portable radio models. It is a dependable and practical solution for organizations that require efficient multi-radio charging in one streamlined unit. Instead of juggling multiple power supplies, users can charge radios or batteries in one location, simplifying radio charging for multiple users between shifts and ensuring devices are always organized and fully charged.

H-Series, iSeries

HP602, HP682, HP702, HP782, PD602i, PD662i, PD682i

Smart Charging Solution for PNC380S PoC Radios

The Hytera MCL35-S Multi-Unit Charger is an advanced, centralized charging system designed for efficient power management for multiple Hytera PNC380S PoC Radios. Supporting up to six radios and six batteries, it provides intelligent monitoring and maintenance features that help extend battery life, improve fleet readiness, and streamline radio management. The MCL35-S goes beyond basic charging with built-in tools for battery capacity checks, regular maintenance, and system monitoring. Its smart interface allows users to inspect stored batteries, track charging performance, and ensure every unit in the fleet is operating at its best. The system also supports batch programming and firmware upgrades, making it easy to configure multiple radios simultaneously and keep software up to date.

PoC

PNC380S

Open, Half-Wrap Case with Belt Loop

The Hytera NCN001 is a sturdy, non-swivel nylon carry case with a half-wrap design, belt loop, and shoulder strap, built for daily use with Hytera TC-320 and TC-508 analog radios. It offers light protection while keeping the screen, keys, and audio accessible during operation. Washable materials and a compact fit make it a practical option for teams that want straightforward protection in a flexible carrying case.

HYT

TC-508

Carrying Case for HP602 and HP682 H-Series Radios

The Hytera NCN011 is a rugged nylon case that protects your radio from everyday impacts. It fits select Hytera HP602 and HP682 H-Series Radios, along with select iSeries BD and PD radios, keeping buttons and audio easily accessible. Light and comfortable for long shifts, the NCN011 makes it simple to carry your radio on a belt or strap, keeping it protected and ready whenever you need it.

H-Series, iSeries

BD502i, BD552i, BD612i, HP602, HP682, PD402i, PD482i, PD502i, PD562i, PD602i, PD662i, PD682i

Durable and Mobile Transport for Hytera Compact Repeaters

The Hytera NCN035 is a lightweight nylon backpack designed for safely transporting Hytera HR652 repeaters with optional batteries and supporting gear in the field. Crafted from rugged, wear-resistant nylon, this pack is built for daily use in demanding environments, providing a practical and organized solution for mobile teams and technical crews. With a streamlined design and reinforced construction, the NCN035 offers reliable portability without unnecessary bulk. Whether used to fight wildfires or search and rescue in rugged terrain, or any other portable repeater application, it helps keep essential equipment protected and ready to deploy. Comfortable to wear and easy to pack, the Hytera NCN035 Nylon Backpack enhances mobility and operational efficiency. Two-Way Radio Power Acessories

H-Series

HR652

PC109 Programming Cable for DMR Mobile Radios

iSeries

MD612i, MD622i

PC110 DB26 Back-to-Back Cable for Hytera Mobile Radios and Repeaters

H-Series

HM782, HR1062

PC142 DB9 to DB26 Wireless Link Cable for Hytera Mobile and Repeater Systems

H-Series

HM782, HR1062

PC152 USB Programming Cable for Hytera H-Series Portable Radios

H-Series

HP602, HP682, HP702, HP782

PC153 131 ft Remote Control Head Cable for Hytera HM785 Mobile Radios

H-Series

HM782

PC154 32.8 ft Remote Control Head Cable for Hytera HM785 Mobile Radios

H-Series

HM782

USB Cable for Hytera PoC Radios and Accessories

The Hytera PC158 USB Cable provides a reliable USB connection for powering PoC devices and accessories. This genuine Hytera cable is a simple way to keep devices updated and configured to your exact operational needs. The PC158 requires the PS3007 US-Standard Power Adapter to charge compatible devices.

PoC

PNC360S, PNC560, PNC560S

PC160 9.8 ft Remote Control Head Cable for Hytera HM785 Mobile Radios

H-Series

HM782

PC30 USB Programming Cable for Hytera TC-320 Analog Radios

HYT

TC-320

PC37 USB Programming Cable for Hytera Mobile Radios and Repeaters

H-Series

HM652, HM682, HM782, HR1062

PC38 USB Programming Cable for Hytera PD7i Series Portable Radios

iSeries

PD982i, PD982i

PC40 DB26 Programming Cable for Hytera Mobile Radios and Repeaters

H-Series

HR1062

PC45 USB Programming Cable for Hytera PD6i Series Radios

iSeries

PD602i, PD662i, PD682i

PC47 USB Programming Cable for Hytera Mobile Radios and Repeaters

H-Series

HM782, HR1062

PC49 Back-to-Back DB26 Data Cable for Hytera Mobile Radios and Repeaters

H-Series

HM782, HR1062

PC60 Ignition Sense Cable for Hytera Mobile Radios

H-Series, iSeries

HM652, HM682, HM782, MD612i, MD622i

PC69 USB Programming Cable for Hytera BD3i and PD3i Series Radios

iSeries

BD302i, PD362i

PC76 USB Programming Cable for Hytera BD, PD, and TC Series Radios

iSeries

BD502i, BD552i, BD612i, PD402i, PD482i

PC80 USB Programming and Charging Cable for Hytera Radios and Accessories

PoC

PNC380S

PC82 Connecting Cable for Hytera Mobile Radios

H-Series

MD782i

PC87 Back-to-Back Cable with Ignition for Hytera MD782i Mobile Radios

H-Series

MD782i

Keep Your Radio Protected with this Waterproof/Dustproof Bag

The Hytera PCN006 is a clear waterproof bag that protects your radio from rain, dust, and splashes while you work. This accessory gives teams a simple and effective way to safeguard their handhelds without giving up visibility or access when they need to talk.

HYT, iSeries

PD402i, PD482i, PD502i, PD562i, PD602i, PD662i, PD682i, TC-508

Compact Charging Solution for Hytera ESW01 Bluetooth Earpiece

The Hytera POA107 Wireless Charging Adapter is specifically designed for effortless charging of the Hytera ESW01 Bluetooth Earpiece. Featuring a sleek and compact form factor, the POA107 uses the Hytera PS1030 Power Adapter or any standard micro-USB cable, enabling easy charging from laptops, wall adapters, or vehicle chargers. This ensures your Bluetooth headset remains fully charged and operational whenever you need it. Its small footprint makes it an excellent choice for cluttered workspaces, offering convenience without compromising performance. The Hytera POA107 is the perfect charging solution for users requiring continuous availability of their Bluetooth earpiece in professional settings.

iSeries

BD502i, BD552i, BD612i, PD402i, PD482i, PD982i

Assembly Cable for Hands-Free Operation in Cranes and Heavy Equipment

The Hytera POA117 is an all-in-one cable kit designed to improve in-vehicle radio communications by enabling HM782 mobile radio connectivity to a Push-to-Talk (PTT) foot switch, a sun visor microphone, and an external speaker cable. The assembly cable has a DB26 connector to an HM782 radio, and splits into three cables: one with a 3.5mm jack for use with the POA85 PTT foot pedal, and two with 3.5mm sockets for use with the P0A77 visor mic and the SM09S2 external speaker. The foot PTT enables hands-free transmit control for safer operation while driving, while the visor-mounted microphone provides clear voice pickup from a convenient, discreet mounting location inside the vehicle. The external speaker cable supports connection to an external speaker to increase the receive audio volume and clarity in loud cab environments.

H-Series

HM782

PTT Communication with Rugged, Wearable Design

The Hytera POA121 Bluetooth Push-to-Talk (PTT) Ring offers a discreet solution, allowing users to transmit messages and change channels without needing to handle their radios directly. When paired with Bluetooth-enabled Hytera radios, this innovative ring enables intuitive, fingertip control of critical radio functions, enhancing operational efficiency and convenience. Designed with comfort in mind, the POA121 features an adjustable band suitable for finger sizes ranging from US 7.5 to 12.5, and an integrated LED status indicator to confirm a reliable connection to your device. Engineered for rugged conditions, this Bluetooth ring is IP67-rated for dust and water resistance, making it ideal for challenging work environments. Its powerful battery provides up to 100 hours of usage, supported by a custom charging cable for rapid recharging.

H-Series, iSeries, PoC

BD502i, BD552i, BD612i, HP602, HP682, HP702, HP782, MD612i, MD622i, PD402i, PD482i, PNC360S, PNC380S, PNC550

Convenient Charging Accessory for Hytera Portable Radios

The Hytera POA129 Contact-Charge Battery Cover is a practical accessory that makes charging the Hytera BD552i, BD502i, PD362i Compact DMR Radios faster and easier. When paired with the CH10L24 Desktop Charger, the POA129 enables simple contact charging without removing the battery from the radio. This saves time during daily use and reduces wear on charging ports.

iSeries

PD362i

Repeater Interconnect for Failover Redundancy

The Hytera POA147 Back-to-Back Cable is designed to provide direct interconnection of H-Series HR1062 repeaters using DB26 connectors. This specialized cable supports repeater backup and failover redundancy with multiple repeater systems. Engineered for secure and stable connectivity, the POA147 ensures reliable signal transmission in professional environments where consistent performance is critical. Ideal for advanced installations, dispatch environments, and systems integrators; this cable supports scalable communication infrastructure while maintaining dependable operational standards.

H-Series

HR1062

Clear PET Film for Everyday Screen Protection

The Hytera POA169 is a durable screen protector that helps guard your PDC760 display from scratches, dust, and light impacts. It goes on in seconds and keeps the screen bright and easy to read. Built for daily use, it is a simple and effective way to protect your screen, keeping your device looking new.

PoC

PDC760

Durable Display Protection for Hytera PNC560 Portable Radio

The Hytera POA200 is a durable, tempered glass screen protector designed to protect the display of your Hytera PNC560 PoC radio from everyday wear, scratches, and smudges. Easy to apply and built to last, this protective glass layer helps maintain screen visibility and reduces the risk of damage in demanding environments. Ideal for users in field operations, transportation, and utilities, the POA200 extends the life of your radio’s display while preserving clarity and responsiveness.

PoC

PNC560

Carry Case with Hand Strap for the PNC560 PoC Mobile Computer

The Hytera POA207 is a specially designed carrying case with an adjustable hand strap for the Hytera PNC560 Push-to-Talk over Cellular (PoC) device. The POA207 offers a layer of protection for the device, helping absorb shocks and resist wear during daily use. Lightweight yet protective, this clip enhances both comfort and portability without compromising on device security.

PoC

PNC560

Heavy-duty, Slip Resistant External Push-to-Talk (PTT) Footswitch Accessory

The Hytera POA44 Heavy-Duty Footswitch provides reliable, hands-free Push-to-Talk (PTT) functionality, enhancing safety and convenience for vehicle operators. Designed specifically to allow drivers to communicate without removing their hands from the wheel, the POA44 reduces distractions and significantly increases operational safety across diverse fleet applications. Featuring robust, slip-resistant metal construction, the POA44 footswitch is engineered for durability and long-lasting performance in demanding environments. Its compact form factor, combined with a reinforced 13-foot accessory cable, ensures versatile installation options in virtually any vehicle type. Ideal for professional drivers and fleet managers looking to improve safety standards and streamline communications, the Hytera POA44 Heavy-Duty Footswitch delivers reliable performance and peace of mind on the road.

iSeries

MD612i, MD622i

Network Surge Protection for Ethernet ports

The Hytera POA45 is an Ethernet surge arrester designed to protect network-connected radio infrastructure from electrical surges and transient voltage spikes. When installed inline with Ethernet connections, the POA45 helps safeguard sensitive communication equipment from damage caused by lightning strikes, electrical interference, or power fluctuations.

iSeries

RD982iS

Bluetooth PTT with two programmable keys

Small and discreet designed Bluetooth PTT for covert and convenient communication. Two programmable keys can be programmed with volume and channel up and down functions via CPS

iSeries

PD982i

Seamless Charging and Power Management for Hytera Radios

The Hytera POA59 Battery Adapter is designed to provide reliable power for Hytera portable radios and compatible multi-unit chargers such as the MCA08. It ensures efficient charging, stable power delivery, and consistent performance across all connected devices.

iSeries

PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PD982i, PD982i

Car Kit Antenna Adapter

Car kit antenna adapter connects the active car kits with the vehicle antenna

iSeries

PD702i, PD752i, PD782i

Sun Visor Microphone for Hands-Free Mobile Radio Communication

Highly sensitive microphone for installation on visor or other location in vehicles, with 11.5-foot cable and 3.5mm jack for use with the POA117 cable assembly for the HM782 mobile radio, and the CK10 Car Kit with the PNC380S PoC radio.

H-Series, PoC

HM782, PNC380S

External Push-to-Talk Foot Pedal for Hytera Mobile Radios

The Hytera POA85 Foot Switch is a durable push-to-talk (PTT) accessory designed to provide convenient hands-free communication for compatible Hytera mobile radios. Acting as an external PTT control, this foot-operated switch allows users to transmit messages without using their hands, making it ideal for environments where operators must remain focused on other tasks. Built for reliability and repeated use, the POA85 enhances communication efficiency in vehicle-based operations, dispatch centers, and industrial settings. By enabling hands-free transmission, the foot switch improves safety and accessibility, particularly in situations where manual PTT operation may be impractical or hazardous. The POA85 must be used in conjunction with the Hytera POA117 accessory and is compatible with Hytera MD612i, MD622i, MD652i, MD782i, HM652, HM682, and HM782 mobile radios. Its simple installation and rugged construction make it a practical solution for professionals who require seamless and reliable voice communication. Two-Way Radio Carrying Accessories

H-Series, iSeries

MD612i, MD622i, MD652i, HM652, HM682, HM782

Reliable Power Supply for Hytera CH05L01 and TC--320

The Hytera PS0602 Power Adapter is a high-quality external power supply designed for use with the Hytera CH05L01 MCU Rapid-Rate Single Charger and the TC-320 Analog Radio. It provides stable and efficient power output to ensure safe, reliable charging for compatible Hytera products. Compact and lightweight, the PS0602 is easy to use in both office and field environments. Its durable design delivers consistent performance across a wide range of operating conditions, protecting radios and chargers from voltage fluctuations and power interruptions.

HYT

TC-320

Dependable Power Supply for Hytera Chargers

The Hytera PS1014 Power Adapter is a durable and efficient power source designed for use with Hytera H-Series single-unit chargers and Hytera DMR radios. It provides a 12 VDC output at 1 A, ensuring steady and safe power delivery for consistent radio and battery charging performance.

H-Series, HYT, iSeries

BD502i, BD552i, BD612i, HP602, HP682, HP702, HP702, HP782, HP782, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PD982i, PD982i, TC-508

Compact and Reliable Power Supply for Hytera Chargers

The Hytera PS1030 Power Adapter is a compact and efficient power supply designed to provide reliable 5 VDC output for Hytera portable radio chargers and accessories. It is compatible with various single-unit and multi-unit chargers, such as the CH10L24, delivering stable power for safe and consistent battery charging.

iSeries

BD302i, BD502i, BD552i, BD612i, PD362i, PD402i, PD482i, PD982i

Power Supply Chassis for HM782 Mobile Radio Base Station

H-Series

HM782

12V/2A Power Supply for Hytera CH10A06 Dual-Pocket Charger

The Hytera PS2002 Power Adapter is a US-standard switching power supply designed to deliver stable and efficient power for the discontinued Hytera CH10A06 Dual-Pocket Charger. With a 12V/2A output, it provides consistent performance to ensure safe and dependable charging for Hytera radios and batteries. NOTE: This accessory can be purchased from Authorized Hytera US Dealers and is used with an End of Life (EOL) radio that is no longer available.

iSeries

PD602i, PD662i, PD682i

Compact USB Power Supply for Hytera PoC Devices

The Hytera PS2023 Power Adapter is a compact and efficient USB-based power adapter designed for use with USB cables to charge Hytera PoC radios. With an input range of 90–264 VAC and an output of 5VDC/2A via USB, this adapter delivers consistent and safe charging for compatible radios and accessories. Designed for everyday operation, the PS2023 is UL certified and features a standard US plug format, making it suitable for office and field use. Its compact size and simple USB interface make it a versatile choice for powering Hytera PoC radios.

PoC

PNC360S, PNC380S, PNC550, VM780

220 W Power Supply for Hytera Mobile Radios and Repeaters

The Hytera PS22002 External Power Supply delivers a robust 220 Watts of output (13.8V/16A) from a wide input range of 90–264 VAC, designed for Hytera mobile radios and repeater systems. This unit supports both main and lead-acid backup battery modes when utility power fails, it seamlessly switches over to battery operation. Measuring 11.7 x 6.9 x 3.4 inches and weighing around 14.3 pounds, it’s built for professional environments requiring reliable, long-term power supply. It’s an ideal power solution for demanding communication systems that need consistent, uninterrupted operation.

H-Series, iSeries

HM782, HR1062, MD612i, MD622i

Compact 5V/2A USB Power Supply for Hytera PoC Radios

The Hytera PS3007 Power Adapter is a compact, reliable power solution designed for Hytera PoC radios. With an input range of 100–240 VAC and an output of 5 VDC at 2 A, it provides steady and efficient charging for compatible radios and accessories. Built for everyday use, the PS3007 features a standard US plug and a USB output interface that makes it convenient for both office and field applications. Its lightweight design ensures easy transport and clutter-free charging, helping users keep their devices powered wherever the job takes them.

PoC

PNC360S, PNC560S

Multi-Port USB Power Adapter for Six Hytera PD362i Two-Way Radios

The Hytera PS6001 Six-Unit Switching Power Adapter is a high-efficiency power supply designed to provide multi-unit charging for PD362i compact DMR two-way radios. With an input range of 90–264 VAC and a 5 VDC, 6 A output, it delivers stable, consistent power for up to six radios. Engineered to meet Hytera’s strict standards for safety and quality, the PS6001 provides the dependable power management that busy teams and large fleets rely on. Its compact, lightweight design makes it ideal for use in offices or dispatch centers where multiple radios need simultaneous charging.

iSeries

BD302i, PD362i

High-Efficiency 12VDC/7A Power Supply for Multi-Unit Charging Systems

The Hytera PS7501 Power Adapter is a switching power supply designed for multi-unit charger setups such as the MCA08, MCL19, and MCL30. With a broad input range of 90–264 VAC, it delivers a stable 12 VDC output at 7 A, ensuring reliable power delivery for multi-unit charger systems. This compact unit supports professional charging environments where several radios need to be charged simultaneously in a centralized system. Built to meet Hytera’s quality and certification standards, it offers dependable performance for demanding operational settings.

iSeries

PD982i

Power Adapter for HR652 Compact Repeater Battery

The Hytera PS8002 is a high-quality AC/DC Power Adapter cable designed to deliver 16.8 VDC output to charge the BL9915 Lithium-Ion Battery Pack when paired with the HR652 compact portable repeater. With an input range of 100–240 VAC, it provides stable, efficient, and safe charging performance in any environment. Compact and lightweight, the PS8002 is built for daily use in offices, field operations, and mobile setups. It supports consistent power delivery and helps extend battery life through regulated output and built-in protection against overvoltage, overcurrent, and short circuits.

H-Series

HR652

24VDC to 12VDC Converter for H-Series Mobile Radios

The Hytera PV8002 Power Supply is a professional-grade AC/DC converter engineered to deliver reliable 12 VDC at 8.4 A output power for H-Series mobile radios. It ensures stable and consistent energy delivery across a variety of operational settings. Compact yet powerful, the PV8002 integrates seamlessly with Hytera DMR Mobile Radios. It’s the dependable choice for organizations that demand steady performance, long service life, and the confidence of Hytera’s proven engineering in every mission.

H-Series

HM782

Genuine Power Cable for Hytera Mobile Radios and Repeaters

The Hytera PWC03 is a genuine AC power cord that delivers a secure, reliable connection for select Hytera DMR mobile radios and repeaters. It is a simple, dependable choice for bench setups, base stations, and rack installations.

H-Series

HR1062, MD612i, MD622i

15 Amp Vehicle Power Lead for Hytera Mobile Radios

The Hytera PWC10 is a heavy-duty DC power cable designed for mobile radio installations that require a stable 12 V feed. With an effective length of about 9.8 feet and a current rating of 15 amps, it is well suited for in-vehicle wiring and bench setups where a longer, robust lead helps ensure clean power delivery.

H-Series, iSeries

HM782, MD612i, MD622i

10 Amp DC Lead for Hytera Repeaters

The Hytera PWC11 is a heavy-duty 12 AWG DC power cable rated at 10 amps with a 9.8-foot length, ideal for bench or rack installations of Hytera repeaters. It is commonly paired with models such as the Hytera HR1062 DMR Repeater and is offered in red and black conductors for clear, secure wiring.

H-Series

HR1062

15 Amp Vehicle Power Lead for Hytera Mobile Radios

The Hytera PWC12 is a heavy-duty DC power cable designed for mobile radio installations that require a stable 12 V feed. With an effective length of about 16 feet and a current rating of 15 amps, it is well suited for in-vehicle wiring and bench setups where a longer, robust lead helps ensure clean power delivery.

H-Series, iSeries

HM782, MD612i, MD622i

12 AWG Power Supply Cable for Hytera Repeaters

The Hytera PWC31 is a heavy-duty 12 AWG DC power cord in a 2-Pin red and black configuration, UL-rated for 600 V and measuring 10.4 feet, ideal for clean rack or bench runs. Compatible with the Hytera HR1062 DMR Repeater, the PWC31 provides a secure, straightforward connection to a suitable DC power supply for dependable operation.

H-Series

HR1062

DC Power Lead for the MNC360 Mobile Radio

The Hytera PWC34 is the standard power cable for the Hytera MNC360 PoC Mobile Radio. Its 9.8-foot length provides ample reach for tidy routing in vehicles and equipment racks. Supports safe, reliable operation in professional fleet installations.

PoC

MNC360

Remote Mount Kit

Remote Mount Kit, without control head, with 19.6 ft. cable, only for MD782i * only applicable for mobile radios ordered after 1st Jan. 2012

iSeries

MD782i

Single Control Head Remote Mounting Kit with 32’ Cable

The HM782 features a removable remote control head, which is the radio body face plate with the controls, screen, and mic connector port. The Hytera RCC32 is a remote control head kit that provides remote mounting of a single remote control head for the Hytera HM782 mobile radio. Ideal for custom vehicle installations, this kit allows the radio body to be mounted in a discrete location, such as under the seat or in the back of the vehicle and provides connectivity to the remote control head on the dashboard or elsewhere in the vehicle. The RCC32 includes:(1) 32 ft. power and data cable with 6 pin aviation connectors for secure attachment.(1) Face Plate that connects to the radio body and features two 6-Pin connector ports for single or dual remote heads.(1) Head Back Plate that connects to the back of the remote control head with ribbon connectors, a 6-Pin connector port for the cable, and mounting connectors for attachment to the BRK08 Mobile Radio Bracket (sold separately). Built to Hytera’s professional standards, the RCC32 delivers reliable signal transmission and consistent performance in fleet vehicles, security operations, school buses, and EMS vehicles. Its durable construction supports long-term use in demanding mobile applications. The BRK08 Mobile Radio Bracket is required for mounting the HM782 radio and is sold separately.

H-Series

HM782

Single Control Head Remote Mounting Kit with 10’ Cable

The HM782 features a removable remote control head, which is the radio body face plate with the controls, screen, and mic connector port. The Hytera RCC33 is a remote control head kit that provides remote mounting of a single remote control head for the Hytera HM782 mobile radio. Ideal for custom vehicle installations, this kit allows the radio body to be mounted in a discrete location, such as under the seat or in the back of the vehicle and provides connectivity to the remote control head on the dashboard or elsewhere in the vehicle. The RCC32 includes:(1) 10 ft. power and data cable with 6 pin aviation connectors for secure attachment.(1) Face Plate that connects to the radio body and features two 6-Pin connector ports for single or dual remote heads.(1) Head Back Plate that connects to the back of the remote control head with ribbon connectors, a 6-Pin connector port for the cable, and mounting connectors for attachment to the BRK08 Mobile Radio Bracket (sold separately). Built to Hytera’s professional standards, the RCC33 delivers reliable signal transmission and consistent performance in fleet vehicles, security operations, school buses, and EMS vehicles. Its durable construction supports long-term use in demanding mobile applications. The BRK08 Mobile Radio Bracket is required for mounting the HM782 radio and is sold separately.

H-Series

HM782

Single Control Head Remote Mounting Kit with 131’ Cable

The HM782 features a removable remote control head, which is the radio body face plate with the controls, screen, and mic connector port. The Hytera RCC34 is a remote control head kit that provides remote mounting of a single remote control head for the Hytera HM782 mobile radio. Ideal for custom vehicle installations, this kit allows the radio body to be mounted in a discrete location, such as under the seat or in the back of the vehicle and provides connectivity to the remote control head on the dashboard or elsewhere in the vehicle. The RCC34 includes:(1) 131 ft. power and data cable with 6 pin aviation connectors for secure attachment.(1) Face Plate that connects to the radio body and features two 6-Pin connector ports for single or dual remote heads.(1) Head Back Plate that connects to the back of the remote control head with ribbon connectors, a 6-Pin connector port for the cable, and mounting connectors for attachment to the BRK08 Mobile Radio Bracket (sold separately). Built to Hytera’s professional standards, the RCC34 delivers reliable signal transmission and consistent performance in fleet vehicles, security operations, school buses, and EMS vehicles. Its durable construction supports long-term use in demanding mobile applications. The BRK08 Mobile Radio Bracket is required for mounting the HM782 radio and is sold separately.

H-Series

HM782

Add a Second Remote Control Face Plate for Flexible Vehicle Installations

The Hytera RCC35 is a second control head designed to expand the functionality of the Hytera HM782 mobile radio by enabling a dual remote control head configuration. This accessory allows users to add an additional control interface in vehicles or command environments where radio access from multiple positions is required. The RCC35 includes the control head and a back plate, forming the second control head end kit for the HM782. It provides dual control head installation using the RCC32, RCC33, or RCC34 remote head installation kits, along with additional remote control head cables (PC160, PC153, or PC154) and mounting bracket (BRK08), which are sold separately. Built to Hytera’s professional standards, the RCC35 provides a reliable solution for expanding radio control access in fleet vehicles, dispatch operations, and mobile command environments.

H-Series

HM782

Neck Strap Lanyard for Handheld Two-Way Radios

The Hytera RO01 is a durable nylon neck strap designed to enhance portability and prevent accidental drops when using Hytera handheld two-way radios. Constructed from lightweight yet strong woven material, the RO01 secures around the neck and attaches easily to the radio’s lanyard or strap point. Ideal for users who need quick access to their radio without sacrificing security, this strap is well-suited for retail, hospitality, education, and light industrial applications. The Hytera RO01 Nylon Neck Strap adds an extra layer of safety and convenience to your everyday radio operations.

HYT, iSeries

PD362i, TC-320, VM780

Comfortable, Secure Wrist Strap for Daily Radio Use

The Hytera RO03 is a rugged nylon wrist strap designed to keep your radio close at hand while minimizing the risk of accidental drops. Built from tough, wear-resistant material, the RO03 easily secures to compatible Hytera portable radios, providing a lightweight, low-profile solution for everyday carry.

H-Series, HYT, iSeries

BD302i, BD502i, BD552i, BD612i, HP602, HP682, HP702, HP702, HP782, HP782, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, PD602i, PD662i, PD682i, PD702i, PD782i, PNC380S, TC-508

Professional-Grade Leather Strap for Secure Radio Handling

The Hytera RO04 Leather Wrist Strap is a premium carrying accessory designed to enhance radio security and user comfort in professional settings. Made from durable leather, the RO04 provides a strong and comfortable grip, helping prevent accidental drops while keeping the radio easily accessible throughout the day. Ideal for industries that value both functionality and a polished appearance, the RO04 attaches securely to compatible Hytera handheld radios. Its high-quality construction offers long-lasting performance and a refined look, making it a reliable choice for daily radio operation.

iSeries

PD982i, PD982i

13.8 VDC, 23 Amp Bench Power Supply for Radios and Repeaters

H-Series, PoC

MNC360, HM652, HM682, HM782

Remote Speaker Microphone with 3.5mm Audio Jack and Swivel Clip

Compact designed remote speaker microphone with 3.5mm audio jack (for use with receive-only earpiece) and 360 degree swivel metal clip.

HYT, iSeries

BD502i, BD552i, BD612i, PD402i, PD482i, PD502i, PD502i, PD562i, PD562i, TC-508

High-Output Audio Accessory for Vehicle-Based Radio Communication

The Hytera SM09C1 External Speaker provides amplified, crystal-clear audio, perfect for environments where standard two-way radio speakers fall short. Designed with robust housing, it effectively handles the demanding conditions of fixed installations within vehicle cabins. Featuring a secure dual-Pin connection, the SM09C1 pairs seamlessly with the MNC360 PoC Mobile Radio, ensuring consistent and reliable audio performance. Delivering powerful, distortion-free sound with a substantial 15-watt output, this external speaker effortlessly cuts through ambient noise, ensuring critical alerts and radio transmissions remain clear and understandable. Installation flexibility is enhanced by a 6-foot cable and an adjustable mounting bracket, allowing secure attachment to both horizontal and vertical surfaces for ideal speaker positioning. With its superior audio clarity and versatile mounting options, the Hytera SM09C1 External Speaker ensures dependable, high-quality communication for vehicle-based teams operating in challenging environments.